• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

HELP ASAP! Truck Won't Start!


JNB

New Member
Joined
Aug 23, 2010
Messages
4
Vehicle Year
1999
Transmission
Automatic
I have a 99 Ranger, 91k, V6 4.0..

I have been getting a code P1131.. HO2S Lean (Bank 1, Sensor 1)
It's not the O2 Sensor, so I've been troubleshooting trying to figure it out.


I was troubleshooting the MAF just as the book and the site say to, and the truck died. It will not start for anything now.

Any ideas?

I need help fast!

Thanks
 
make sure you dont have vacuum leaks and make sure the air cleaner tube is not rip. how does your truck run
 
does it even try to turn over or no noise at all?
 
It does turn over... I've checked out the O2, ICM, I've also checked for fuel and spark.. It's getting both until after just a quick crank or two and then the theft system shuts down the spark.

When I hook up the OBD II reader, it can't scan the truck which has led me to the PCM. I'm pretty sure it's bad and everything is just going haywire since it isn't communicating back?

Any confirmations or objections?
 
sounds like you may have a bad key or other issue with the antitheft, did you try another key?
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top