h3o
Active Member
- Joined
- Feb 10, 2008
- Messages
- 33
- Vehicle Year
- 1988
- Transmission
- Automatic
Well kinda just stuck here
Truck runs okay, smokes on startup but once the cat warms up smoke goes away, so i know im burning oil somewhere. No codes, compressions is right around 160 on all cylinders. Now my timing was way off so i just adjusted it by feel until i bought a timing light. Finally got a timing light and timed it to 10 btdc but now the idle surges and i get misses on the lower rpm range(1000-3000) after that its fine. I tried to just goof off with the timing to see if it would stop surging but nothing. Still jumps from 500-1000 rpm, and i tried spraying carb cleaner on my vaccum lines and couldn't find a leak. Does anyone have any clue what it could be. O ya and my fuel pressure is at 37 at static but goes to 0 after a few seconds, stays around 37 when idling unless the idle starts surging. And there is no fuel in the fpr vaccum line.
Truck runs okay, smokes on startup but once the cat warms up smoke goes away, so i know im burning oil somewhere. No codes, compressions is right around 160 on all cylinders. Now my timing was way off so i just adjusted it by feel until i bought a timing light. Finally got a timing light and timed it to 10 btdc but now the idle surges and i get misses on the lower rpm range(1000-3000) after that its fine. I tried to just goof off with the timing to see if it would stop surging but nothing. Still jumps from 500-1000 rpm, and i tried spraying carb cleaner on my vaccum lines and couldn't find a leak. Does anyone have any clue what it could be. O ya and my fuel pressure is at 37 at static but goes to 0 after a few seconds, stays around 37 when idling unless the idle starts surging. And there is no fuel in the fpr vaccum line.