harmontic bal

[just truckn]

hi guys i am in the process of putting together my new motor and i am having a hard time getting the harmontic bal installed dose anybody have any ideasas too get this on i tried with the bolt but it only gose so far any help would be app.

 

[Rifleman]

The bolt should pull it right on. Be sure everything is lining up and the pin is seated properly. Was the crank inspected by a machine shop? Perhaps a little assembly lube might help.

 

[RustedRanger]

Some parts stores have a Harmonic balancer installer you can borrow. Thats the "right" way to do it. I have never used one though cause I couldn't find one at the time. I agree with what Rifleman said also.

 

[just truckn]

hey guys thanks i got i pulled it back off and lubed it up good and it pulled it right in