Gen 1 dual fuel pumps

[stegomon]

Has any one converted a dual fuel pump into a single fuel pump.
My idea is to put a get 2 fuel pump in the tank and replace the frame mounted with a fuel filter. What do you people think?

 

[wildbill23c]

Have no idea if it would work. The in-tank pump I assume is the pump and sending unit so not sure why that wouldn't work....but I think I'd rather replace the fuel pump in the frame rail than an in-tank pump LOL.

 

[PetroleumJunkie412]

Yes. Kemso 340lph in the tank, filter only on the rail.

Works well.

Do not use a walbro. They fail within two years.

 

[Shran]

@PetroleumJunkie412 is that Kemso pump a direct replacement for a 1st gen in-tank?

I want to do this too, my in-tank pump has failed a bunch of times and I want to eliminate the high pressure pump and the canister filter.

 

[PetroleumJunkie412]

was for me. Just cut out old pump, and drop new one in sending unit.

make sure to use a plastic tube over your hot wire. Gasoline eats heat shrink.

 

[PetroleumJunkie412]

https://www.realstreetperformance.com/blog/fuel-pump-test-2018-real-street-performance/#results

Must read article if considering one pump option.