Fuse Panel Diagram

[bks]

Hey everyone. I recently bought a '00 B3000 SE v6. It didn't come with an owners manual. My back-up lights won't turn on when i shift to reverse and I want to check the fuse for it before I replace the switch. I bought a '00 ranger/ Mazda repair manual but is doesn't have and charts of the fuse panel. can anyone post a pic of their owners manual with the diagram in it? Oh and I checked the bulbs, they are good. Thanks--Ben

 

[Earl43P]

It's fuse 6 in the cab.

I have a lot of the 2000 schematics in a big file, but not that one.
It has the fuseboxes and layout, but not he reverse lights schematic.

If you send me a private message (click on my username) I'll e-mail it to you (include an e-mail address).


If you have an auto trans, the DTRS may need adjusted or replaced (used to be called the neutral safety switch).

If it's a manual trans, there is a $10 red switch on the driverside of the trans that could be bad (it screws right out). Be careful not to lose the actuating rod if you take that switch out. Jumping the two sockets of its connector will tell you the switch is bad.


Welcome to The Ranger Station!

 

[bks]

Thanks, It is missing it's fuse. Is it a 10a or 7.5 a? Thanks

 

[Teddyzee]

Click "Vehicle Basics" near the top left of this link to get your manual

http://owner.ford.com/servlet/ContentServer?pagename=Owner/Page/NationalEventPage

Then just enter year make model.