Ford 2.8l v6 Crankshaft pulley / Harmonic balancer

[Jrdulac]

Good afternoon or morning,

I’m posting to this forum for help looking for a harmonic balancer / crankshaft pulley for my 85’ 2.8l v6.

I’m not sure if there is anything aftermarket, I had messaged a few junkyards and my area without any luck

 

[SenorNoob]

E4TZ6316B - Genuine Ford Pulley W/Vibration Damper

Ford part # E4TZ6316B at FordPartsGiant.com. Wholesale-priced and fast-delivered Ford parts Pulley W/Vibration Damper.

www.fordpartsgiant.com

It says discontinued, but it also says it it fits:

1986-1989 Ford Aerostar	4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 3.0L	4AT A4LD, 5MT
1980-1989 Ford Bronco	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L	3AT C6, 4AT AOD, 4MT, 5MT
1984-1989 Ford Bronco II	4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L	3AT C5, 4AT A4LD, 4MT, 5MT
1980-1989 Ford E-150	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L Diesel, 8 Cyl 7.5L	3AT C6, 3MT, 4AT AOD, 4MT, 5MT
1980-1989 Ford E-250	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L Diesel, 8 Cyl 7.3L Diesel, 8 Cyl 7.5L	3AT C6, 3MT, 4AT AOD, 4AT E4OD
1980-1989 Ford E-350/E-350 Super Duty	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L Diesel, 8 Cyl 7.3L Diesel, 8 Cyl 7.5L	3AT C6, 3MT, 4AT E4OD, 4MT, 5MT
1980-1989 Ford F Super Duty	8 Cyl 7.3L Diesel Turbocharged	4AT 4R100, 5AT, 5MT, 6MT
1980-1989 Ford F-150	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.9L	3AT C5, 3AT C6, 3MT, 4AT AOD, 4MT, 5MT
1980-1989 Ford F-250	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L	3AT C6, 3MT, 4AT AOD, 4AT E4OD, 4MT, 5MT
1980-1989 Ford F-350	6 Cyl 4.9L, 8 Cyl 5.0L, 8 Cyl 5.8L, 8 Cyl 6.6L, 8 Cyl 6.9L, 8 Cyl 7.3L, 8 Cyl 7.5L	3AT C6, 4AT E4OD, 4MT, 5MT
1988-1989 Ford F59	8 Cyl 7.3L Diesel	4AT E4OD, 5MT
1983-1989 Ford Ranger	4 Cyl 2.0L, 4 Cyl 2.2L, 4 Cyl 2.3L, 6 Cyl 2.8L, 6 Cyl 2.9L	3AT C3, 3AT C5, 4AT A4LD, 4MT, 5MT
1982-1989 Mercury Grand Marquis	8 Cyl 4.2L, 8 Cyl 5.0L, 8 Cyl 5.8L	4AT AOD

That's an awful lot of options find a used one from...