Flywheel/flywheel Bolts

[Busterdude2]

Currently gathering parts to do a manual swap into my truck. While going through what I have I found the flywheel bolts don't protrude past the back of the flywheel so there is no way they would bolt to the crank. Not sure if I have the wrong flywheel or the wrong bolts. As far as I have researched both are correct.

Flywheel: LUK LFW156
Bolts: ATP ZX-1026

Can anyone who confirm if either of these are the correct part?

 

[BlackBII]

How long are the bolts you have now? They're likely for an automatic transmission flex plate.

Apart from pulling some at a junkyard they are tough to find. Fastenal part number 11113398 should work.

https://www.fastenal.com/products/details/11113398


This post has the correct bolts pictured.

Can't find any part numbers, but here's a pic.

Flywheel bolts are M10x1.0 and about 45mm long

Pressure plate are M8x1.25 and about 15mm long with a lock washer

 

[Busterdude2]

The bolts I have are M10-1.0 x 23mm. I will order those from fastenal. Thank you.