Fabricating anything right now?

[86 slo-vo]

ive got a few but havent got around to plating the tops yet...i need some sunshine to get motivation to get them on lol

threw a cup holder in the top for shits and giggles

dont guess i ever uploaded the other ones

 

[86 slo-vo]

Dang, that would be nice. If it touches the ground, it has to have a plate...except for bicycles.

around here...if its something you drive...if it has a vin, headlights and tail lights your pretty much good theyll give you a plate

if you buy a vehicle out of state you have to get an inspection, which consists of them looking at the title and the vin and see if they match, they dont look at anything else

but yea trailers and all that mopeds blah blah blah no need for a plate

my camper has had an indiana plate on it since i got it, titles not in my name

 

[fx2prerunner]

finished my press, It will see the bead blaster and some paint.

[/IMG]

[/IMG]
home made pins

Im going to use the press for dimple dies that im making now

 

[Boggin]

i am impressed, it inspires me to build one lol

 

[blue88b2]

so this next hadrail i'm building mostly out of old square headed bolts and nuts from an old building tear down. Guess they have sentimental value to this feller... the rail is for his beach house! i got to drive over and pre-fit my frames last week, it's pretty sweet! got a start on the design today. gonna have waves and different stuff in it. Just had a little time today, got the sun done. The bottom half of the rail is 1" dia perforated steel sheeting cut to fit.

-Jason

 

[crawlin91]

That is some very creative cool work. You should post up more pics when you finish.^

 

[crawlin91]

I just finished this air powered elbow engine up for a class, everything made from aluminum, brass and steel stock and machined using a mill and a lathe to .001". The best part is now that I am trained on the machines I can use them for my own projects....i was kind of thinking high steer arms.

 

[99RangerKrazy]

I got tired of the tailgate net I had on my Ranger, so I came up with this:

I also got my tube/half doors painted and back on for the summer:

Hoping to start on a front winch bumper here before too long.

 

[rangercrawler]

WOW! Some sick tractors, I just sold my 1966 International Harvester Cub Cadet 122 restored it myself.

 

[straycat]

I got tired of the tailgate net I had on my Ranger, so I came up with this:

I also got my tube/half doors painted and back on for the summer:

Hoping to start on a front winch bumper here before too long.

Now, that is some great work. The paint came out really nice. I really like the tube door, that looks safe. That tailgate is really trick!!! A++++++

 

[Iron Ranger]

Finally (almost) got the trailer done!

Got these welded in all 4 corners for multiple rachet strap locations.

New taillight brackets.


All the rails and the tailgate are removeable for different situations. I made it to handle many different types of loads.

 

[Will]

I recently finished this hitch, under-ride guard on my skoolie.

Also cut a hole through the front bumper and welded a receiver through it for a bike rack.

 

[Toreadorranger]

building a custom hardtail KZ400.

 

[bcost882]

dude i dont know why but the best thing I have seen is a dude out here that pre runs a bug with full tube chassis and then has a old 72 VW beetle ridin on 35s that runs 14s on the track. now that is the shiznit. prerunner with a full tube chassis that was all made with a hand bender. I am amazed he makes crazy stuff

 

[fx2prerunner]

^I did this with a manual bender^

[/IMG]