red_ranger93
Well-Known Member
how much of a drop pitman arm would you suggest for a 7-8 inch eb 44 lift thanks and also do i need to change the carrier to put 4.88s or 4.56s in or can i get a thick gear
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
dropped pitman arm and carrier Qs
- Thread starter red_ranger93
- Start date
- Joined
- Oct 21, 2008
- Messages
- 1,536
- Vehicle Year
- 1987, 2009
- Transmission
- Manual
It depends on how you want to set up your steering. With crossover high steer at 7" lift I'm actually on top of the stock pitman arm. Without crossover high steer I needed a 6" drop pitman arm. Best thing to do would be to get some PVC pipe and mock up your steering and measure.
Dana 44 carrier break, 3.73 and down 3.92 and up, but thick cut gears are available.
-Jester
Dana 44 carrier break, 3.73 and down 3.92 and up, but thick cut gears are available.
-Jester
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Latest posts
-
-
-
Wanted 2005 ranger 4.0 / 5 speed conversion knowledge wanted!- Latest: bobbywalter
-
-
-
-
-
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
