Welcome Visitor! Please take a few seconds and 
- Joined
- May 25, 2020
- Messages
- 508
- City
- B’ham AL
- Vehicle Year
- 94
- Engine
- 4.0 V6
- Transmission
- Manual
- My credo
- God’s plan, not mine.
If I could machine a case, cover plate and spud shaft, how many people would be interested in a doubler kit?
I would machine it to accept a manual shifter, and it would made to double up to a 1350 or 13-54. As far as the shift components and reduction gears inside, those would be sourced (by you) from a donor case.
I could further develop a dual stick shifter if needed and there was enough interest.
I DO NOT HAVE ANYTHING TO SELL AS OF RIGHT NOW!! just gauging interest, and if there is enough, I WILL go through the proper channels and become a vendor.
Also, I am open to other ideas people may want to see made.
I would machine it to accept a manual shifter, and it would made to double up to a 1350 or 13-54. As far as the shift components and reduction gears inside, those would be sourced (by you) from a donor case.
I could further develop a dual stick shifter if needed and there was enough interest.
I DO NOT HAVE ANYTHING TO SELL AS OF RIGHT NOW!! just gauging interest, and if there is enough, I WILL go through the proper channels and become a vendor.
Also, I am open to other ideas people may want to see made.
