did a lil interior customizing today.

[BlackBII]

Looks good.

It looks like the line going from the cab to the bed doesn't match up, or maybe Im going crazy....

 

[BeaterMan]

I'm actually very curious about your down the road results as well. The only thing keeping me from doing the same thing is a few people have been saying that without the padding it gets very loud in there. Let us know if that's true.

it always been real loud, lack of good weather stripping and such. its slightly louder but nothing too major.

Looks good.

It looks like the line going from the cab to the bed doesn't match up, or maybe Im going crazy....

its slightly off but its due to the fact that the bed isn't sitting level with the cab, i followed the lower body line all the way back and if ya can notice the blue pin striping is off about the same amount. i'm thinking it due to my ranger "gansta" lean. lol

 

[dangeranger01]

I did my rockers with the duplicolor rattle can bed liner and its held up great so far. I have had it a little over a year. It looks like you did the roll on stuff correct? If so did it dry hard or is it kinda soft how Rihno Lining is? I wanna do the inside also, but im debating weather to do it or take it somewhere and have it profesionaly done.

 

[BeaterMan]

I did my rockers with the duplicolor rattle can bed liner and its held up great so far. I have had it a little over a year. It looks like you did the roll on stuff correct? If so did it dry hard or is it kinda soft how Rihno Lining is? I wanna do the inside also, but im debating weather to do it or take it somewhere and have it profesionaly done.

yea i used the roll on kind. at first it was kinda soft but today its nice n hard, thinking it just had to fully dry since i put alot of coats on. i'm happy with it so far.

 

[ForOffRoadDriving]

i did my cab and floor with the herculiner brush on stuff. it looks nice, but it didnt seem like it was very hard until i went over it with the UV top coat, which also gave it a uniform glossy look. I just wish i had done 5 or 6 coats in the cab and 3 or 4 on the rockers instead of just 2, only because its a little spotty on the rockers and it would be nice to be able to pull the carpet out and have the cab floor be a more consistent texture.