• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

Complete 2000 4 x 4 X Cab For Parts


all10pins

Well-Known Member
Joined
Aug 15, 2015
Messages
64
Vehicle Year
1997
Transmission
Automatic
I have a 2000 Ranger 2 door 4 x 4 with the 4.0 Liter engine in it. (Blown head gasket) for parts. Gray in color. It has the 8.8 inch rear end under it. Everything is still available but tires and Wheels and cats.
 
I am looking for a passenger air bag switch and a complete rear sway bar for my 03 2WD automatic with long bed. Are those available and how much please? Thanks!
 
Where is it located. I have a 2002 ranger 4.0 4x4 with a bad frame. But good drive train
 
The switch has a key hole just like a door lock and is located below the center console, it has a light that goes on momentarily when you turn the ignition on and then turns off shortly after. Once the key of the door/ignition is inserted and turned to the "off" position it disables the passenger air bag in case you have a child sitting next to you and in that case the light stays on indicating the airbag for the passenger has been disabled. I hope this makes sense, I will try and attach a photo of it. Thanks
 

Attachments

  • index.png
    index.png
    9.8 KB · Views: 219
The switch has a key hole just like a door lock and is located below the center console, it has a light that goes on momentarily when you turn the ignition on and then turns off shortly after. Once the key of the door/ignition is inserted and turned to the "off" position it disables the passenger air bag in case you have a child sitting next to you and in that case the light stays on indicating the airbag for the passenger has been disabled. I hope this makes sense, I will try and attach a photo of it. Thanks



I’m pretty sure he was talking to the OP when he asked “where is it located?”... Meaning where is the truck located.
 
Are they bucket seats with center console ? I'm interested in finding bucket seats and a console for my 97 xlt standard cab 4x4. If you don't have a problem with shipping, and you have what I'm looking for, I will pay for the shipping and also cover whatever costs you incurred getting them shipped.
 
How much are you asking for the tranny?
 
I have a 2000 Ranger 2 door 4 x 4 with the 4.0 Liter engine in it. (Blown head gasket) for parts. Gray in color. It has the 8.8 inch rear end under it. Everything is still available but tires and Wheels and cats.
I need a bed and bumper for 2011 I’m not sure what years will interchange do you know
 
I need a bed and bumper for 2011 I’m not sure what years will interchange do you know

Both will fit. Make sure you save your lights and harness since I think the OP’s are different.

Sheet metal wise, the trucks are the same from ‘98 up. ‘94 up might work but I’m not 100% on that.
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top