Changed Clutch Won't Fire

[jrollins557]

I have a 98 Ranger 2.5 liter 2wd. I just changed the clutch and slave cylinder. Put everything back together and it won't fire at all.

 

[LIMA BEAN]

Did you hook your neutral switch or clutch/starter interlock back up or pinch the wires in the bell housing?

 

[Haywire6000]

Do you mean wont fire like no just wont crank?
When you try to crank it does the check engine/oil light come on?
If it does it's probably the neutral safety switch.
You confirm this you can jump out the switch.

 

[JRanger91]

Double check the wiring to the starter as well as ground straps coming off the engine.

 

[bigtruck94]

I did the same thing. Tighten up all your cables that lead to the transmission and starter. Double check the battery too