Calling all 1st and 2nd gen rbv owners with 5spd and manual tcase. I need your help!!

[The_Dealer]

Ok guys this is prolly the wierdest shit anyones asked for on trs. I'm looking for someone with an fm145 or 146 trans and manual tcase to help me out. I swapped out my 2.8 for a 5.0 and like an idiot I sold my floor plate and boot. Well it turns out that the m5r1 plate won't work with the m5r2. So I need someone that is willing to either sell me an fm146 floorplate or trace it out and make a template on cardboard or paper or whatever and mail it to me.I need it marked where the bolt holes go to mount it to the floorboard, and the screw holes for the boot. Basically I need a paper copy of the thing so I can make my own. I can't find one anywhere around here. Any 1st or second gen without the m5r1 will work. By floorplate I'm talking bout the sheet metal piece tht bolts to the floor where the boot screws to. The m5r1 one I have is so far forward I can't mod it to work. If anyone is willing to help me out pm me anD ill give u my address. Thanks guys

 

[AllanD]

You can get a blank plate with only mounting screw holes out of any explorer with an auto trans and electric shift t-case.

Because ALL rangers/bronco2/explorers have a plate in the floor.

AD