Are all 3 u-joints on rear driveshaft the same? '91 4x4 Supercab

[Fairlaniac]

Are all 3 u-joints on rear driveshaft the same? '91 4x4 Supercab. Are the Moog p/n 369 used in all 3 spots?

Thanks,

 

[adsm08]

Go look it up on a parts store site and see if they all use the same number.

 

[Fairlaniac]

I wanted to order via RockAuto and wanted to get it right. :-(

 

[adsm08]

I don't see how my suggestion would prevent you from doing that.

Go look it up on NAPA or AutoZone. Compare the part numbers. If they are all the same then go get your joints from Rock. If they aren't figure out what you need.

 

[Fairlaniac]

The local parts store isn't really convenient for me and if I would go I would have the decency to purchase the parts there. I don't like to use them as a resource without paying for their services. It's not right or wrong it's just not me. However if someone here wants to answer the question I'd be grateful.

Thanks,

 

[Fairlaniac]

I did check the mentioned websites prior to my post and did not find with 100% certainty that the Moog 369 is the same for all 3 locations. That is why I asked here. I'll just make this a multiple day project and remove the u-joints, verify their dimensions and order accordingly. Thanks for the tips!

 

[Andy D]

Just look 'em up on line. I got a pair for the Rat. Greaseable Spicers for $13.50 a piece.

 

[adsm08]

Ok, since I can't seem to get you to understand what I am getting at, I went and did it for you.

Napa lists all three positions as taking a 369 joint.

http://www.napaonline.com/Catalog/R...k=Keyword&Nty=1&N=599001+101991+50028+2028044