Welcome Visitor! Please take a few seconds and 
autinkoceja
New Member
hello everyone my name is Austin im 23 and I have been on the forum for a while but i never posted anything before. i figured i should share my build.
I built a 1999 Ranger with a 3.0 manual 5 speed, its now a solid axle truck, for axles i used a dana 44HD front and sterling 10.25 for the rear. axles are geared to 4:88. truck is currently on 35s and only 2wd at the moment. the next stage is doing a 5.0 swap and finishing the 4wd as well as putting it on some 37s. I already bought a 1998 explorer as a donor vehicle. The truck has lots of other mods done such as the honey comb front end swap, a custom headliner, mirror swap, headache rack I built. if anyone is on instagram i have a page for the truck @Thatbighubranger
I built a 1999 Ranger with a 3.0 manual 5 speed, its now a solid axle truck, for axles i used a dana 44HD front and sterling 10.25 for the rear. axles are geared to 4:88. truck is currently on 35s and only 2wd at the moment. the next stage is doing a 5.0 swap and finishing the 4wd as well as putting it on some 37s. I already bought a 1998 explorer as a donor vehicle. The truck has lots of other mods done such as the honey comb front end swap, a custom headliner, mirror swap, headache rack I built. if anyone is on instagram i have a page for the truck @Thatbighubranger
Attachments
Last edited:
