94' fullwidth swap

[Fordrangerman04]

Project started off as a 8" skyjacker lift that wasn't good enough. Had an offroad shop do a sas using a cherokee d30 4.56 yukons alloy shafts and swayaway coilovers. The shop fabbed up some radius arms and kept it simple. I spent a lot of money and the truck drove and rode like crap so I started collecting parts. So the plan now is 79' 3/4 ton axles Dana 44 front 60 rear. Bought yukons chromoly shafts, detroit locker up front, t&t axle truss, 1.75 od dom .250 wall, 1" rod ends, and 3" ballistic joints. Running three link up front and leads on the back. So far i got the truss welded up, and the plan is to make my 3 link mirror all pro's Toyota kit.

 

[Ford78]

Sounds like u have a good plan. any pics

 

[Fordrangerman04]

Just of the truss welded but my phone won't upload, photos should be up soon

 

[Fordrangerman04]

Ford78 how did you deal with the vss?

 

[Ford78]

I swaped out tranfercases that had one on it from a 97or 96 ranger.