• Welcome Visitor! Please take a few seconds and Register for our forum. Even if you don't want to post, you can still 'Like' and react to posts.

2001 Headlight housing


computersoc

Well-Known Member
Joined
Apr 16, 2013
Messages
121
Transmission
Manual
I have a 2001 Ranger XLT 2.5L. Will these work since I see some reviews for others say 2001 is listed as working but needs modifications to the wiring. I just want something similar that is plug and play so I can swap them myself.


My current stock headlamps are too low even though they're aligned as high as they go. My high beams are basically what I'd expect out of a low beam.

If I install LED 9007 bulbs in these housings that I linked, will I get rapid flicker of the turn signal or other issues? Or will I need an adapter so it doesn't do that?
 
Last edited:
Every time someone posts about new headlights... I find myself "shopping" for new headlights. My factory lights are still in great shape and I don't need a set but some of them are pretty cool.

I think the common thread with most of these aftermarket offerings is... it's a total crapshoot. They come broke... don't fit... they fogged up... needs rewiring... it's always something. I didn't look to close at the reviews for the ones you posted... but the C clamp thing looks pretty cool. I say... if you are going that route... be prepared to have to modify something and expect a lesser quality part then what the factory parts are.

If you decide to buy a set... be sure to review them. They seem a bit pricey... but current as far as design.
 
Amazon has a good return policy so back they go if they are too much of a hassle. I'll update everyone on how it goes. Taking the headlight housing out doesn't look too hard. Anything has to be better than the stock lights.
 
I have a 2001 Ranger XLT 2.5L. Will these work since I see some reviews for others say 2001 is listed as working but needs modifications to the wiring. I just want something similar that is plug and play so I can swap them myself.


My current stock headlamps are too low even though they're aligned as high as they go. My high beams are basically what I'd expect out of a low beam.

If I install LED 9007 bulbs in these housings that I linked, will I get rapid flicker of the turn signal or other issues? Or will I need an adapter so it doesn't do that?

im interested in these as well. Did you ever buy them?
 

Sponsored Ad


Sponsored Ad

TRS Events

Member & Vendor Upgrades

For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.

Recently Featured

Want to see your truck here? Share your photos and details in the forum.

Ranger Adventure Video

TRS Merchandise

Follow TRS On Instagram

TRS Sponsors


Sponsored Ad


Sponsored Ad


Amazon Deals

Sponsored Ad

Back
Top