- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
Not much of an update but I got my other lower coil bucket fabbed up tonight and one of my upper coil retainers.
1993 Splash build
- Thread starter brinker88
- Start date
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
Anybody know what size and length bolts are needed for stock body mount bushings?
- Joined
- Oct 27, 2007
- Messages
- 3,387
- Points
- 3,101
- City
- Fort Wayne, IN
- Vehicle Year
- 1993, 2001
- Transmission
- Manual
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
That'd be great dude. Thanks.
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
Body lift is DEFINITELY coming off. Got my shaft clearanced tonight and checked for rubbing. Ended up cutting 3/16" off the slip shaft because that was binding. Got one side completely buttoned up and the tire on. Jacked up the other side so it was even and I have 14" between the top of the tire and the middle of the wheel well. WAY too tall.
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
patience, grasshopper! I shall have the suspension buttoned up besides the crossmember and steering by the end of today. 
RangerSVT
Oct 09 OTOTM
Article Contributor
ASE Certified Tech
OTOTM Winner
Boosted (Not Stock)
V8 Engine Swap
Solid Axle Swap
- Joined
- Mar 15, 2009
- Messages
- 7,883
- Points
- 3,101
- Vehicle Year
- 19962002
- Transmission
- Automatic
Come on, what's taking so long you slacker! Btw, if you don't want to buy another set of coils, you can cut the coils 1/2 a coil at a time til you get the desired height 
keep up the good work...
SVT
Btw, if you don't want to buy another set of coils, you can cut the coils 1/2 a coil at a time til you get the desired height keep up the good work...SVT
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
Well I got the truck sitting on all 4's with new springs and front leaf spring hangers. I dont have as much lift as I thought I would. They netted me right around 5-5.5" of lift, which is perfect. I have to re-do my one lower coil bucket retainer as it's binding up on the coil and making it sit higher on that side.
RangerSVT
Oct 09 OTOTM
Article Contributor
ASE Certified Tech
OTOTM Winner
Boosted (Not Stock)
V8 Engine Swap
Solid Axle Swap
- Joined
- Mar 15, 2009
- Messages
- 7,883
- Points
- 3,101
- Vehicle Year
- 19962002
- Transmission
- Automatic
Kool! Got Pics
SVT
SVT
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
Good:
Bad:
- Joined
- Oct 14, 2010
- Messages
- 3,498
- Points
- 1,601
- City
- Williamsport, Pa
- Vehicle Year
- 1993
- Transmission
- Automatic
I'm going to run a 2 inch body lift with new body bushings which will still give me about the same height as I have now. I need to fab up a hinged drop plate for the front when I'm driving it on the street for legality issues. When I offroad, I'll just flip it up and wing nut it fast.
- Joined
- Oct 19, 2011
- Messages
- 119
- Points
- 1,601
- Vehicle Year
- 1991
- Transmission
- Automatic
how much do you think new body bushings will add
Sponsored Ad
TRS Events & Gatherings
Featured Rangers
TRS Latest Video
Official TRS Merchandise
Follow TRS On Instagram
