1991 4.0

[chessman21]

started poring oil out front driver side it looks,, zero oil pressure.. any ideas?
engine sounds good.,

 

[dtrombley]

Oil level sensor? Definitely don't run it any longer with zero oil pressure

Sent from my VS987 using Tapatalk

 

[jeremysdad]

Oil pressure sensor blowout, maybe? Ditto on the running it, just in case it's a valid reading.

 

[RonD]

Yes, oil PRESSURE sender if it is pouring out and no oil pressure on gauge

Oil level sensor, on the side of oil pan, would leak oil but not "pour" out oil, as it is not under pressure, just a gravity leak.

Drawing of locations here: http://repairguide.autozone.com/zne...0c152/80/07/69/cd/medium/0900c152800769cd.gif

 

[chessman21]

i put two quarts in and just now see it on tip of stick
And i dont see anything coming out underneath. I see the level sensor i think but iv yet to find sending unit, im gonna take the wheel off next..

 

[RonD]

It is towards the front on drivers side below exhaust and above oil pan, one wire connection

 

[chessman21]

Took the wheel off but hard to see anything that way plus everything covered in oil isn't helping. I got a new one today, looks simple enough.,., whats the best way in to it? From underneath?

 

[ratdude747]

Took the wheel off but hard to see anything that way plus everything covered in oil isn't helping. I got a new one today, looks simple enough.,., whats the best way in to it? From underneath?

Yup. Should be right by the steering box.