Welcome Visitor! Please take a few seconds and dSINtia
Well-Known Member
- Joined
- Dec 8, 2010
- Messages
- 85
- Transmission
- Automatic
In my last update I forgot to mention that I'm back in Chicago for a couple months for the holiday season. I've spent the last couple days or so working out the electrical bugs, primarily focusing on reverse lighting today… I won. I was wondering if I was getting 12V back out of the DTRS, turns out I was at the chassis side of the 42 pin harness thankfully meaning the sensor itself isn't bad. The chassis side of pin 21 output was simply connected to the wrong circuit. I remedied that by essentially creating a new reverse lighting circuit by splicing into the chassis side output of pin 21 at C115 and running an entirely new wire back to the trailer tow connection pigtail. Bingo... Reverse lighting.
Tomorrow I'm jumping into the NSS and DTRS circuits to clear these last two DTCs. Neither DTC affects drivability and right now the vehicle is 100% operational.
Let me tell you if there is anyone out there questioning whether or not the 5.0 swap is the way to go in these little B2s, all they need to do is take a ride in this little rig and they will be entirely convinced that is the only way to go. I am shocked at the difference... Every aspect of the truck is different and improved.
More to come... (And pics too).
Tomorrow I'm jumping into the NSS and DTRS circuits to clear these last two DTCs. Neither DTC affects drivability and right now the vehicle is 100% operational.
Let me tell you if there is anyone out there questioning whether or not the 5.0 swap is the way to go in these little B2s, all they need to do is take a ride in this little rig and they will be entirely convinced that is the only way to go. I am shocked at the difference... Every aspect of the truck is different and improved.
More to come... (And pics too).
