transplant
Member
Pulled motor putting back in I noticed front shaft of trans has about 3/8" play should I worry? How hard is it to change beating in guessing input shaft.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
07 man trans
- Thread starter transplant
- Start date
transplant
Member
Sorry 07 2wd 4 banger
transplant
Member
It's only 1/8th inch play
Transman304
Well-Known Member
- Joined
- Oct 3, 2014
- Messages
- 292
- City
- Morgantown WV
- Vehicle Year
- 2004
- Transmission
- Automatic
- My credo
- If you can’t fix it with a hammer, you have an electrical problem
Just make sure pilot bushing in crank is in good shape and you will be good to go.
Shran
Junk Collector
TRS Forum Moderator
Supporting Member
Article Contributor
Solid Axle Swap
Truck of Month
1/8" play isn't too bad, most I have messed with have that much or more and are in good shape. The input shaft is actually two pieces, the part you see ends shortly after it enters the transmission where it rides on another bearing. As Transman said, the pilot bearing keeps it centered so a little play there is normal and OK.
transplant
Member
Cool thanks just threw a new bearing in now time to bleed the clutch.
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Latest posts
-
-
-
-
-
-
-
-
Lost key 86 ranger how can I bypass I have no cash and no spare
- Latest: Everettldez
-
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
