v8 conversion

I finally got my Torque Monster headers. It took a little over 6 months so it wasn't as bad as some people have experienced.

Hello All, I have seen a few posts on here talking about plumbing fuel lines for carburetors in V8 swaps. Most recommend using a return style fuel regulator, how necessary is this return line. What is its purpose? I already have a MR. GASKET 9710 regulator with no return, is this workable. Is...

Another problem after the other. When i go to turn my key i hear silence, whereas a month ago it would prime and start. Its a rebuilt 306 5.0 that would cut out at higher rpm's, so i replaced the fuel pump a few days ago and still no priming. Im getting to the point where i think wiring a switch...

So I plan on doing a 351 window swap and 4x4 conversion on my 1985 ford ranger recently I found a bronco II that has a 351 with a 4x4 4 speed trans that was rolled over and the body was taken off the frame And I want to buy it to do the swap on my truck since the 351 was on a bronco II It should...

What's going on guys. I have a 2001 ranger edge 4x4 that had the 4.0 I got a donor explorer 1997 5.0l that I took the running motor and trans and dropped it in my ranger. I used the return line for the fuel on my stock fuel line and used a one way filter I also got the the engine completely...

I have a 1983 Ford Ranger which I am putting in a 351w in it. I read up online to use these three part numbers. I'm having trouble finding which models they actually came off of, if anyone knows that would be a great help. Ford P/S Brackets P/N E7TZ-3C511-A Ford P/S Pump P/N E6SZ-3A674-B Ford...

i am in the process of the V8 conversion of my 94 ranger. i was wondering if there was any pressure differences between the 5.0L and the 4.0L power steering pumps?

I'm planning on a build on my 94 ranger 4.0 4x4. I got almost everything I need to start the project. I got a 305 that's more then enough for this truck. And I'm looking around for a automatic 4x4 set up with the front drive shaft on the left side of the trany so i can hook up my front axle...

This is going to be one hell of a project, but I'm about to start prepping my '01 Ranger XLT for a built 460 Big Block that one of my racing buddies has laying around Prep work suggestions? I have in my sights ladder bars and boxing the frame, but does anyone know the best way to prepare the...

I currently have a 84 Bronco II with the 2.8 and a 5 speed out of an 85 Ranger...it started life as an auto but when the auto died I converted her over with help from a few friends :) I'm wanting to do a v8 conversion as cheaply as possible and prefer a 5speed...but cost decides everything :)...

i have a 91 ranger with a 65 ford 289 in it, im using a mustang ii C4, not sure exactly what year it came out of but the mustang 2 i got it out of had been converted to a V8. i am sure it is the M2 version because of the smaller bellhousing which fits much better in the ranger since the first...