brake lights

both brake lights quit working at the same time. can't figure out why. 98 ranger - running lights work, and that is the same bulb as the brake lights (Sylvania 3157, dual filament) - hazards and turn signals work (Sylvania 3156, single filament) - reverse lights don't work, haven't for a long...

Just wired a push to start in my ranger, all run functions seem to work except turn signals and brake lights. Which wire do I need to be focused on to complete that circuit? 1990 2wd 5 speed converted

Hello all, I am considering buying one of these products: I imagine the LEDs will be much brighter for illuminating the bed, and perhaps the brake light may be brighter as well. Anyone tried them out ? How well do they hold up ?

Hello all! I am currently having an issue with my 1998 Ranger XLT Supercab 6'ft and was hoping I could get some insight on this issue. My issue is my brake lights are not working. My taillights are coming on with the headlights like usual, but no brake lights. same thing is going on with the...

Hi All, I have a 1991 Ford Ranger Supercab 3.0 V6. I have an issue where the Driver's brake light won't engage when the pedal is pressed, but the passenger side does, as well as the headlight function and turn signal's work on it. I have 2 questions on this that Google doesn't seem to be...

Hey guys, I have a brake light issue on my 03 Ranger XL. The brake lights come on when I move the brake light (brand new might I add, old one had same issue I'm talking about) switch up or down, but don't when I press the pedal down or do for a little bit then stops working, then when I jiggle...

i have no brake lights to the tail lights or 3rd brake light 2005 b4000 4x4 so far: replaced pedal switch checked connections to multifunction switch checked grounds on bulbs i have tail lights and signals but no brake lights. i am chasing the wiring trying to figure out what wires go...

Hey all, looking for some quick help here. I recently had a 3" performance accessories body lift installed on my 2010 XLT. Didn't realize until I got home that I now have no brake lights, no taillights, no reverse, no rear blinkers - even the 3rd brake light on the cab doesn't work. Front...

Hi! I'm having an issue with my brake lights staying on all the time. They have been staying on for about a month and a half or 2 months now and I haven't been able to figure out the problem yet. The problem started out as the lights just coming on and off at random, even as the truck was off...

I have a 93 Ranger 3.0L that I have been rebuilding - almost done. Until I noticed that when I turn on a turn signal (either side gives same results), I noticed my tail lights blinking too. Also, the High Brake light on the cab blinks too. A couple of notes: I've replaced all the lights with...

Hey all, So my trusty Ranger is confusing me. I noticed in the past few days that I do not have brake lights when pressing on the pedal. Troubleshooting steps I have done are as follows: Replace brake switch. Replace both bulbs on each side. If you put hazards on, they flash. If tail lights...

Might as well say hi, everyone. First post, trying to make a positive entrance. I bought an '07 Ranger recently when I finally got fed up with my last ride, an aging BMW M3. I love working on stuff, but if I wanted to pay airplane prices for parts, I'd just buy an airplane. After a quick...

Okay so I noticed my blinker wasn't blinking in the pass side so I checked all lights an found the rear pass light was out so I replaced the bulb and still no blinking or borage light on that side also the front turn signal comes on and stays on when switch is turned that way I'm stumped I was...

Greetings, Friend of mine following me let me know that the brake lights on the bed of my Ranger were not working but the third light on the cab was functioning correctly. I checked the bulbs and they are fine. Fuses are good #21 and #22. Obviously the BOO switch is working as the third light...