1992

Hello! I have a vaccum leak on the front pivot point of my throttle body assembly. I've read you ahead. To replace the whole intake manifold since it's integrated. Is that true? If not any ideas how to seal up that leak? Any help would massively appreciated! Thanks!

Hi all, I've got a 1992 Ranger with the 2.3 and after doing some IQ tests recently noticed a significant drop in score. Come to find out I'm my exhaust is leaking in two spots. I have replaced the exhaust manifold and it's continuing to leak from where the EGR tube meets the exhaust manifold...

I have a 1992 xlt, and the driver side door is all messed up and bent the front body panel and the door panel itself, its also hanging wrong and cant close, open, or lock properly. Its got power windows (idk if thats relavant). I was wondering if theres any advice on how to fix the problem...

Hey hey! I got a motor, transmission, and rear end ready to go into a 89-92 Ranger (2.3L 4CYL, 5 speed manual, 2WD). I'm in search of a straight body Ranger (89-92) with these specs with blown engine, bad transmission, etc. Any leads would be much appreciated! Western North Carolina area...

Hey y'all, As a result of the flooding earlier this week in Haywood County, NC, the electrical system of my '92 Ranger is done (and so is the truck). My mechanic (who rebuilt the engine) told me that if I wanted to do anything at this point, I could take the motor (2.3L 4CYL), transmission (5...

I have a 1993 ranger. 4.0 4x4 5 speed Ext cab. It needs a transmission. And I found a 1992 ext cab 2.3 4x4 ranger. with the trans I need. But it also has alot of aftermarket stuff for a decent price. My question is what parts do you guys think will fit my truck? I will copy and past his...

Well, unfortunately I was rear ended by some kid too busy on his cell phone while I was waiting to turn into my drive way. In my beloved 1992 single cab 2.9 4x4 ranger. Keeping the truck vs letting insurance take the truck was only a 300$ difference so I kept it. I love this damn truck. Now I...

Hello! It's my first time to the forum :) I need to replace the engine on my newly-acquired 1992 Ford Ranger: 2.3 L, 4 cylinder, 5-speed, floor shifter. When looking for replacement (used) engines, do I have to match all these specs (1992, 2.3 L, 4 cylinder, 5-speed, floor shifter) or can...

Hey Guys. The driver side door on my 1992 ford ranger has started to rattle quite a bit. It's as if it is not latched tightly anymore. What do you recommend I do to fix this?

comparison, old/new

Right side

straight view

I built a new bumper for the truck so I could use a winch, turned out better than I thought It would for my first real fab project.

Summer trip from Fairbanks to Anchorage when the odometer went to all zeros making it a brand new Ranger. I am about 91 miles north of Anchorage on the Parks Highway . Zero'd out my trip meter when I left Fairbanks so it shows about 265 miles from start of the trip.

As said in the title, I have a 1992 2.3L 8 spark plug ranger Truck ran fine for a while until one day it was hard to start, then when it finally started it was loping as if it was missing hitting the gas would make it spit and sputter and pop and when you let off the gas the rpms would drop to...

Hi everyone, this is my first post. I've been creeping around here as a visitor the last 2 years, its nice to finally come out of the shadows lol. Anyway, in a few days I will finally be ordering a skyjacker class 2 system to lift my 92 ranger 4x4 super cab :yahoo: Been thinking about it since I...

What I have: 1992 Ford ranger stock 4 cylinder Rear diff: 3.73 ratio, 7.5”, 2WD It has bad pinion bearings and I either need to put in new bearings or put a new axle in. I could do either but am looking for a cheap easy solution (not that a bearing swap is terribly difficult, it just sounds like...

Hey everybody, My name is Jonathan, and I'm new here. My ride is a 1992 ford ranger 2.3L 5 speed, regular cab. I'm familiar with the ranger line, I used to have a 98 model a couple years back that was a slight pos, lol. I just have some basic questions. Mileage: What should I expect out of...

Hi guys, I just found this place this week, and am planning on replacing the clutch in my newly-acquired 1992 XLT this Friday(8/14). I knew the clutch was bad when I bought the truck, however I was not aware that it was laying in pieces in the bottom of the bell housing, which I found when I...

My 1992 2.3 hasn't been short of problems, But now she doesn't even wanna start. When you turn the key to fire the engine its pulls power but then just clicks, no attempt to start. battery is good, all fuses are good. It can be push started. But once running its runs really poorly. Idea...