fix_or_repair_daily
New Member
- Joined
- Dec 26, 2007
- Messages
- 208
- Reaction score
- 3
- Points
- 0
- Location
- SW PA
- Vehicle Year
- 1991,1992,1994
- Make / Model
- Ford,Chevy,Satu
- Engine Size
- 2.3, 5.7, 1.9
- Transmission
- Manual
Hi, I put an '86 Merkur engine, harness, and computer into my '84 ranger, and it has a strange problem. When you go to start it, it will not fire up until you let off of the key as long as the engine is still spinning over. It doesn't matter how long you crank it unless you would crank it long enough it would flood, because it is still injecting fuel. When it starts, it runs great. I checked the factory manual for the Merkur, and according to it, it's getting power where and when it should be. I even tested it right at the TFI plug and it is getting power for sure.
I'm completely stumped on this one. Please let me know if you have any ideas on this one.
Thanks,
Josh
I'm completely stumped on this one. Please let me know if you have any ideas on this one.
Thanks,
Josh