GingerKing13
Member
- Joined
- Dec 2, 2016
- Messages
- 56
- Reaction score
- 9
- Points
- 8
- Location
- Defuniak Springs, Fl
- Vehicle Year
- 1988 Super Cab
- Make / Model
- Ford
- Engine Type
- 2.9 V6
- Transmission
- Manual
- 2WD / 4WD
- 4WD
- Total Lift
- 2 inches
- Tire Size
- 31x10.5xR15
Hey guys,
I have a 1988 Ranger 2.9L 4x4 EXT Cab (dana 28 TTB). I'm needing an extra inch or a little more to combat the sag after putting on a steel bumper and winch in the front. I have found reading articles like this fantastic one, https://www.therangerstation.com/tech_library/factoryspacer.shtml , I can use a 90's F-150 2WD coil spring perch to gain that inch.
I cannot find these damn things anywhere. Is anyone able to source these part numbers? I live in Northwest Florida,
F2TZ5A307A (I have a lead on Ebay for this one)
F2TZ-5A307-B (nothin on this guy)
Thank you for the help!
I have a 1988 Ranger 2.9L 4x4 EXT Cab (dana 28 TTB). I'm needing an extra inch or a little more to combat the sag after putting on a steel bumper and winch in the front. I have found reading articles like this fantastic one, https://www.therangerstation.com/tech_library/factoryspacer.shtml , I can use a 90's F-150 2WD coil spring perch to gain that inch.
I cannot find these damn things anywhere. Is anyone able to source these part numbers? I live in Northwest Florida,
F2TZ5A307A (I have a lead on Ebay for this one)
F2TZ-5A307-B (nothin on this guy)
Thank you for the help!