relay

I recently changed out my old incandescent taillight bulbs for new brighter and more reliable LED lights on my 2002 Ranger XLT 4x4 (with manual transmission and 4.0L V-6). Of course, this brought on the electrical load issue and my turn signals now do the “quick flash” of a failed bulb. I...

Friends, I'm having trouble with the 4x4 working reliably. I've read some of the troubleshooting about this but I haven't seen this particular scenario discussed. So, when I start the vehicle the 4WD light on the dash doesn't light. The 4x4 Switch does not light with engine running and does not...

I bought a beater 1999 Mercury Mountaineer with V8 a while back. A previous owner had installed a huge electromagnetic battery cutoff (aka relay) that has a receiver that turns it on and off via a key fob. (Like this: Amazon link. ) As it turns out there is something draining the battery...

Hey fellow rangers, through a slew of craziness after my starter motor died some 6 weeks ago, I've somehow found myself in a extremely newbie mechanic situation. There is only one line ran from my fender mount relay down to my starter solenoid, which is attatched to my starter motor. One wire...

86 2.3l will crank but not fire. I bought this truck from a guy that states "the fuel pump relay went out" replaced the relay and it still wont fire. I have jumped the inertia switch for GP. Here is my current status: Ignition on: no fuel pump prime. however, 12v power applied directly to the...

If anyone is trying to wire up some LED off road lights and have questions about the relays or what wires go where on the switches check out these videos its a simple but effective tutorial and makes the electrical work a breeze Rocker switches https://www.youtube.com/watch?v=EFsZgl4fw-U...

Welp. I didnt want to bug the Ranger forum minds, but I am stumped. I have a 1986 ranger extended cab xlt with a 2.9. Towed it from the desert where it sat since 99 lol. Pretty much entirely new now. I didn't feel I was wasting money because I have no plans on getting rid of it. It has a rebuilt...

I have searched and searched and cannot find anyone that has had this problem. here is what i have. i bought an 2004 Ford Ranger that had a bad motor(timing chain bad). when i got it the motor was half apart. i have since bought a motor off the local junk yard. after installing the motor i...

In my 1992 3.0 the Fuel Relay is going nuts, even after I replaced it. I tightened the ground strap bolt coming off of the negative terminal and cleaned the post and the clamp because I heard this was a ground issue. Any other ideas? The engine also seems to be stumbling when started though it...

I have a 1998 ford ranger with the 2.5l engine. Very amazing vehicle but the a/c does not work. Ive had some very smart a/c people tell me to jumper the pins in the switches and if the compressor kicks on then my switches are bad but i have jumpered the switches and still the compressor wont...