Red_Rider_00
New Member
- Joined
- Sep 2, 2008
- Messages
- 19
- Reaction score
- 0
- Points
- 0
- Vehicle Year
- 2001
- Make / Model
- ford
- Engine Size
- 3.0
- Transmission
- Automatic
My 01 3.0 is showing about 40psi at 60mph and between 0 and 20 at idle. I figure it's a broken shaft between the camshaft position synchronizer and the oil pump. I don't know how to time an engine so will I be able to install this myself and expect it to run? How hard is it to get the engine to TDC? Will I have to pull everything off the front of the motor to be able to see the marks on the crank? Christmas time means no mechanic, I must do this myself. Any help appreciated greatly! Thanks