caliskier
Member
- Joined
- Dec 31, 2007
- Messages
- 31
- Reaction score
- 0
- Points
- 6
- Vehicle Year
- 1994
- Make / Model
- Mazda
- Transmission
- Manual
Hi All,
The title tells the story. Let me discuss break pressure on a scale of 1 to 5 with 5 being the heaviest pressure. When I apply the brakes lightly, at a 1, they don't lock up, but at a 2, for say a normal stop it locks up and skids. Anything 3-5 and its the same result, skids under any pressure but very light. Both the ABS and Brake dash lights are on, and it seams like its the front brakes only, master cylinder is full of brake fluid.
This is a 2WD 1994 Mazda B3000 / Ford Ranger 3.0L V6 extended cab with manual transmission
Any thoughts on what this might be?
The title tells the story. Let me discuss break pressure on a scale of 1 to 5 with 5 being the heaviest pressure. When I apply the brakes lightly, at a 1, they don't lock up, but at a 2, for say a normal stop it locks up and skids. Anything 3-5 and its the same result, skids under any pressure but very light. Both the ABS and Brake dash lights are on, and it seams like its the front brakes only, master cylinder is full of brake fluid.
This is a 2WD 1994 Mazda B3000 / Ford Ranger 3.0L V6 extended cab with manual transmission
Any thoughts on what this might be?
Last edited: