compaqeo
Well-Known Member
- Joined
- Jul 16, 2008
- Messages
- 300
- Vehicle Year
- 1984/1988
- Transmission
- Manual
so....6 years now?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
Toreadorranger Build...2 years in the making
- Thread starter Toreadorranger
- Start date
I'll be done before him!
compaqeo
Well-Known Member
- Joined
- Jul 16, 2008
- Messages
- 300
- Vehicle Year
- 1984/1988
- Transmission
- Manual
haha does he still even post on TRS?
His last activity is 4 days ago so he must still be alive!
- Joined
- May 13, 2009
- Messages
- 3,088
- Age
- 34
- City
- lisle ontario
- Vehicle Year
- 19961991
- Transmission
- Automatic
x2 and i dont even have a ranger right now lol
Im still here, and the project is still alive. I did suffer a setback. I decided I dont like my 44/9" setup. So I picked up a dodge front 60 and rear 70 today. 
Last edited:
Very nice... I know how that goes!
They are a little crusty looking, but they both spin freely.
The front is from a 91 W350 Dodge. It is essentially the same as a chevy front. Internal hubs and 35 spline inners with 30 spline outers. I will be buying a set of D70 front stubs to convert to 35 spline.
The rear is from a similar truck. 35 spline shafts.
The front is from a 91 W350 Dodge. It is essentially the same as a chevy front. Internal hubs and 35 spline inners with 30 spline outers. I will be buying a set of D70 front stubs to convert to 35 spline.
The rear is from a similar truck. 35 spline shafts.
- Joined
- May 13, 2009
- Messages
- 3,088
- Age
- 34
- City
- lisle ontario
- Vehicle Year
- 19961991
- Transmission
- Automatic
Im still here, and the project is still alive. I did suffer a setback. I decided I dont like my 44/9" setup. So I picked up a dodge front 60 and rear 70 today.
awww jeeze man thats like a 3 year set back
compaqeo
Well-Known Member
- Joined
- Jul 16, 2008
- Messages
- 300
- Vehicle Year
- 1984/1988
- Transmission
- Manual
woo we did CPR to this thread...does that D70 have locking hubs on it?
The rear just has FF shafts no hubs.
- Joined
- May 13, 2009
- Messages
- 3,088
- Age
- 34
- City
- lisle ontario
- Vehicle Year
- 19961991
- Transmission
- Automatic
i just realized thats this thread has been around for 4 years! and is only 13 pages long. lol... get on it!
also i seem to remember you working on it in a parking lot? still there or did you get a shop 4 it
also i seem to remember you working on it in a parking lot? still there or did you get a shop 4 it
Last edited:
Still in my driveway. My chevelle project is in the garage.
Here is the new plan.
Passenger D60 Front
5.86 Gears
Detroit
D70 35 spline stubs
Poly Performance 35 spline Flanges
undecided Highsteer arms
1410/1350 Yoke (not sure yet)
35 spline D70 rear
5.86 gears
Detroit
Disk Brakes
1410 Yoke
42" Tires of some sort. Either TSL's or Pitbull Rockers most likely.
Recentered H1's With pressed centers.
Passenger D60 Front
5.86 Gears
Detroit
D70 35 spline stubs
Poly Performance 35 spline Flanges
undecided Highsteer arms
1410/1350 Yoke (not sure yet)
35 spline D70 rear
5.86 gears
Detroit
Disk Brakes
1410 Yoke
42" Tires of some sort. Either TSL's or Pitbull Rockers most likely.
Recentered H1's With pressed centers.
Similar threads
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Latest posts
-
-
-
-
-
-
'97 F350 PSD clutch recommendation, now build and whatnot saga :)- Latest: scotts90ranger
-
-
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
