87 mazda sas swap

[kris97ranger]

hi kris..... im 5'9" by the way. we nver did get a picture fo the whole truck on the 35s in the back and stock front
________
Jiva

 

[mazdafamily]

motor!!!

so i have ordered the four link but it is taking some time to get to my house. so i decided to start on the motor swap. i pulled the 2.2 mazda motor and got the 2.4 (22r) up to the house to get ready for the set up.

pulling the b2200

empty motor bay

first time the toyota motor has moved in 2 years( in the trailer of the ridding lawnmore

mazda and toyota motors beside each other

 

[kris97ranger]

my shirt looks so clean!
________
LIVE SEX WEBSHOWS

 

[mazdafamily]

22r in stall

sorry about the crappy photos it was dark out. i have one day off a weekend in stead of spending it with the girlfriend i spend it with my truck
putting in the 22r motor was a little hard by my self but it was done

so it was such a close fit the motor mounts were only off by about one inch i will have to mod them to fit in the near future.

but over all i think the motor looks great in the mazda but it does sit a little low in the engine bay

 

[kris97ranger]

its gonna sit low cause u have a 3" body lift too. but who cares its a lower centre of gravity. (well the motors lower i know the body lift makes his centre of gravity higher)
________
Glass pipe

 

[mazdafamily]

very true but it just looks too low in the bay i thought i did some thing wrong but it was too dark to see everything i checked it out to day and it is all good

 

[BeaterMan]

looking good . I've always liked those body style of mazda trucks. How much lift do you think that truck has now? Quite a bit I must say.

 

[kris97ranger]

its about 6" plus the bodylift i think....
________
Los angeles county medical marijuana dispensaries

 

[mazdafamily]

looking good . I've always liked those body style of mazda trucks. How much lift do you think that truck has now? Quite a bit I must say.

ya kris is right it is about 6 inch suspension and 3 body but i might have to go bigger, those are 35 under the truck now but they are only 33s now they have a lot of road running on them and i cant fully flex with those tires on so i think i will have to put the over loads back in the rear and block it as well but u never know i might leave it at this height i just bought a house so the truck is kinda not as important as it was a month ago but i still want to keep working on it

 

[kris97ranger]

id just throw the blocks in it the over loads dont lift it any. did you buy just a chevy front or did you get a rear too? and scince u may be going full width now it doesnt need to be as tall
________
VAPOR INFO

 

[mazdafamily]

parts are in

so i finally got the parts i ordered in the mail they were from two different companys, one was air bagit,( panhard bar) and they other was sucidedoors.com( 4 link) they look great it was cheaper to buy them then for me to make them

 

[mazdafamily]

start the front end

i am still working 12 hour night about 2 hours away from my house 6 days a week but that means i have about 1 hour a day to work on the truck today i took the front end off the truck. no more ifs for this mazda!!!!!!!

 

[dangerranger83]

Yaaaa, the solid axle will be so much better looking and stronger too.

Tourch = FTW

 

[strvger]

really like how the 22R motor fits in the engine bay. everything seems to be in easy reach. how much hp and torque will you get from it? looks like you used the engine, tranny and transfer case from the toy, right? any additional cross-member work needed to mount it all up? great job!!

 

[mazdafamily]

22r rework

really like how the 22R motor fits in the engine bay. everything seems to be in easy reach. how much hp and torque will you get from it? looks like you used the engine, tranny and transfer case from the toy, right? any additional cross-member work needed to mount it all up? great job!!

it did fit in the quite nice but there was some problems the stock mazda motor mounts had to moved ahead about 1 1/16 and the tranz mount will have to me modified but is sits right on the stock mazda mount. i just want to make it look nicer. and you are right everything i pretty easy to get to on the motor. but if u notice my ass hole brother stole the fuel pump off the motor.( after it was in my truck )

( he has a 1982 toyota sr5 6 inch suspension 4 inch body but the dumb **** only has 31 ones on it!!!) when he was born god must of stock cotton candy in his head instead of a brain.