Shran
Junk Collector
TRS Forum Moderator
⭐Supporting Member
Article Contributor
Truck of Month
Solid Axle Swap
I was just trying to share a little slice of my hobby.
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
New tools you've bought recently?
- Thread starter Blmpkn
- Start date
I was just trying to share a little slice of my hobby.
- Joined
- Aug 6, 2007
- Messages
- 5,051
- Points
- 3,101
- City
- Georgia
- Vehicle Year
- 1984,1990,1994
- Transmission
- Manual
- My credo
- Toonces drives a Ranger . . . . just not very well.
Snoranger
Professional money waster
TRS Forum Moderator
TRS Event Staff
⭐Supporting Member
Article Contributor
ASE Certified Tech
TRS Event Participant
TRS 25th Anniversary
VAGABOND
GMRS Radio License
- Joined
- Nov 25, 2007
- Messages
- 14,030
- Points
- 3,101
- State - Country
- NJ - USA
- Vehicle Year
- '79,'94,'02,'23
- Vehicle
- Ford Ranger
- Engine
- 2.3 EcoBoost
- Transmission
- Automatic
- My credo
- I didn't ask for your life story, just answer the question!
Cut it out guys.
- Joined
- Aug 6, 2007
- Messages
- 5,051
- Points
- 3,101
- City
- Georgia
- Vehicle Year
- 1984,1990,1994
- Transmission
- Manual
- My credo
- Toonces drives a Ranger . . . . just not very well.
- Joined
- Apr 13, 2009
- Messages
- 15,343
- Points
- 3,101
- Vehicle Year
- '06, '11
- Engine
- 3.0 V6
- Transmission
- Automatic
That's why chainsaw...
what did the chain see? 
lil_Blue_Ford
Cut & Weld
TRS Forum Moderator
⭐Supporting Member
TRS Event Participant
TRS 20th Anniversary
TRS 25th Anniversary
V8 Engine Swap
- Joined
- Aug 6, 2007
- Messages
- 11,205
- Points
- 3,101
- City
- Butler
- State - Country
- PA - USA
- Vehicle Year
- 2000
- Vehicle
- Ford Ranger
- Engine
- 5.0
- Transmission
- Automatic
- Total Drop
- 4”
Chain sees tree and goes munch munch munch…what did the chain see?
sgtsandman
Aircraft Fuel Tank Diver
TRS Forum Moderator
⭐Supporting Member
TRS Event Participant
TRS 20th Anniversary
TRS 25th Anniversary
VAGABOND
U.S. Military - Active
Ham Radio Operator
GMRS Radio License
- Joined
- Mar 11, 2017
- Messages
- 15,989
- Points
- 601
- City
- Aliquippa
- State - Country
- PA - USA
- Vehicle Year
- 2019
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 2.3 EcoBoost
- Transmission
- Automatic
- Tire Size
- 265/70R17
- My credo
- Anything that can go wrong, will go wrong. Plan for it as best you can.
Knock it off or you are going to get dis-bared!
Shran
Junk Collector
TRS Forum Moderator
⭐Supporting Member
Article Contributor
Truck of Month
Solid Axle Swap
I just wanted to branch out and expand my interests since nobody is posting Coleman stuff!
- Joined
- Aug 6, 2007
- Messages
- 5,051
- Points
- 3,101
- City
- Georgia
- Vehicle Year
- 1984,1990,1994
- Transmission
- Manual
- My credo
- Toonces drives a Ranger . . . . just not very well.
Apologies, that the subject is going against your grain. I didn't expect this much kickback.
Coleman . . . meh. Discussing the TRS Chainsaw Massacre is much more cutting edge.
lil_Blue_Ford
Cut & Weld
TRS Forum Moderator
⭐Supporting Member
TRS Event Participant
TRS 20th Anniversary
TRS 25th Anniversary
V8 Engine Swap
- Joined
- Aug 6, 2007
- Messages
- 11,205
- Points
- 3,101
- City
- Butler
- State - Country
- PA - USA
- Vehicle Year
- 2000
- Vehicle
- Ford Ranger
- Engine
- 5.0
- Transmission
- Automatic
- Total Drop
- 4”
is this branched out enough?
Shran
Junk Collector
TRS Forum Moderator
⭐Supporting Member
Article Contributor
Truck of Month
Solid Axle Swap
One other item from the chainsaw auction lot was this really nice post vise. I had one already but the jaws were just a bit bent. Totally usable...but bent. Cleaned this one up & it works great.
This one is definitely NOT new and not new to me either as I have had it for quite a while but I just got around to making it work yesterday. I bought it from a flea market a while back, it sat on a shelf in the shed for a few years. The advance arm was broken off and the chuck, crank handle and table were missing. I was able to track down an advance arm from eBay, modified the quill to take a modern screw on chuck, found a table from another one of these, and today's project was the crank handle. Pretty easy to make that from a piece of 1/4" flat stock. The wood handle I made from a piece of hickory (a chunk of wood that came from a bag in the BBQ aisle, lol.)
These are totally impractical to use these days but it's just cool as hell and I had to make it work. Maybe I will use it for woodworking here and there. But since it's now operational, I just had to see if it would drill a hole and it made the most sense to run it through a piece of mild steel. The quill is sloppy as hell so you for sure need to at least center punch your spot or preferably pilot drill it first... but it made a 3/16" hole and it actually didn't take much effort.
Big question is, how many decades do y'all think it's been since this thing drilled a hole? I am betting a lot of them.
This one is definitely NOT new and not new to me either as I have had it for quite a while but I just got around to making it work yesterday. I bought it from a flea market a while back, it sat on a shelf in the shed for a few years. The advance arm was broken off and the chuck, crank handle and table were missing. I was able to track down an advance arm from eBay, modified the quill to take a modern screw on chuck, found a table from another one of these, and today's project was the crank handle. Pretty easy to make that from a piece of 1/4" flat stock. The wood handle I made from a piece of hickory (a chunk of wood that came from a bag in the BBQ aisle, lol.)
These are totally impractical to use these days but it's just cool as hell and I had to make it work. Maybe I will use it for woodworking here and there. But since it's now operational, I just had to see if it would drill a hole and it made the most sense to run it through a piece of mild steel. The quill is sloppy as hell so you for sure need to at least center punch your spot or preferably pilot drill it first... but it made a 3/16" hole and it actually didn't take much effort.
Big question is, how many decades do y'all think it's been since this thing drilled a hole? I am betting a lot of them.
97RangerXLT
Forum Staff Member
TRS Forum Moderator
Article Contributor
TRS Event Participant
TRS 20th Anniversary
TRS 25th Anniversary
GMRS Radio License
- Joined
- Sep 18, 2007
- Messages
- 7,364
- Points
- 3,101
- City
- Anderson, IN
- State - Country
- IN - USA
- Other
- 2020 Ford Edge Titanium
- Vehicle Year
- 1997
- Vehicle
- Ford Ranger
- Drive
- 4WD
- Engine
- 4.0 V6
- Transmission
- Automatic
- Total Lift
- 2"
- Tire Size
- 31"
ahhh a hand drill... to drill like its 1799..
cool find tho
AJ
cool find tho
AJ
- Joined
- Feb 15, 2020
- Messages
- 6,842
- Points
- 601
- City
- Southern maine
- State - Country
- ME - USA
- Other
- 2023 2 door Big Bend, 2" lift, 35s.
- Vehicle Year
- 1996
- Vehicle
- Ford Ranger
- Drive
- 2WD
- Engine
- 2.3 (4 Cylinder)
- Transmission
- Manual
- Total Drop
- Shackle flip
- Tire Size
- 235/60/15
- My credo
- Its probably better to be self deprecating than self defecating.
Update on the kobalt hammer & HF chisel set
Setup worked a treat on the ranger frame. Not a particularly hard workout though.. well see how well it does busting rivets next weekend.
- Joined
- Nov 20, 2001
- Messages
- 3,765
- Points
- 5,101
- City
- Wayne, PA
- Engine
- Transmission
- Automatic
- Tire Size
- 42
I had to buy a clip on magnifier - was drilling on a stuck manifold bolt in the new engine and I realized I can't see up close worth a damn now. Getting old sucks
Sponsored Ad
Sponsored Ad
Special Events
TRS Events
Member & Vendor Upgrades
Become a Supporting Member:
Or a Supporting Vendor:
Recently Featured
TRS Latest Video
TRS Merchandise
Follow TRS On Instagram
