wiring diagram for 1994 Ranger 4x4 Turn Signals/Brakes


Jeeker

5+ Year Member

Joined
Jun 1, 2017
Messages
29
Points
601
Vehicle Year
1994
Transmission
Manual
Cannot locate a diagram with proper color codes that match mine?(Green,Brown,Black) for ( brakes and turn signal bulb socket) having trouble with turn signals flashing at the same time ?
and seems like a power draw when turn signals are on the brakes applied? ( flasher slows down? )
 
1994 has separate turn signal bulbs, called a 3-wire system

1994 Diagram below

There is no connection between brake lights and turn signals in 1994
So if flasher speed changes with brake lights on then system voltage is low or one of the turn signal bulbs or brake light bulbs has a poor ground

What's the voltage at battery key off(before starting it in the morning) and then engine running?

A good battery will be 12.3v to 12.8volts key off, 12.2v or lower is a failing battery
Engine running should be 13.5v to 14.8volts, never lower than 13.5volts

1994 has 2 Flashers, the one on the front of cab fuse box is turn signals
There is one on the back of cab fuse box for 4-way flashers
 

Attachments

Last edited:
1994 has separate turn signal bulbs, called a 3-wire system

1994 Diagram below

There is no connection between brake lights and turn signals in 1994
So if flasher speed changes with brake lights on then system voltage is low or one of the turn signal bulbs or brake light bulbs has a poor ground

What's the voltage at battery key off(before starting it in the morning) and then engine running?

A good battery will be 12.3v to 12.8volts key off, 12.2v or lower is a failing battery
Engine running should be 13.5v to 14.8volts, never lower than 13.5volts

1994 has 2 Flashers, the one on the front of cab fuse box is turn signals
There is one on the back of cab fuse box for 4-way flashers
Thanx Ron looking into all suggested!
 
I’m just looking for this PDF. Thank you very much. But I had to convert the file because I found that my PDFs stopped displaying correctly on my laptop. I used the PDF Guru editor https://www.hrfuture.net/talent-man...pdf-document-with-extreme-ease-with-pdf-guru/ from an article about how to easily create PDFs with it. So at this stage, I managed to solve the problem this way, until I figure out what’s wrong with my laptop. I suspect the issue is with the reader.
 
Last edited:

Sponsored Ad

TRS Events & Gatherings

Featured Rangers

Want to see your truck here? Share your photos and details in the forum.

TRS Latest Video

Official TRS Merchandise

Follow TRS On Instagram

TRS Ranger Sponsors


Product Suggestions

Back
Top