What did you do to your Ranger today? (Part Deux!)

[Curious Hound]

I went to southington off-road park in Ohio! First time wheeling a ranger and it was fun. View attachment 102858View attachment 102859View attachment 102860View attachment 102861

Fun park!

 

[JoshT]

Ya snooze, ya lose! Like I don’t have enough projects, I was thinking of picking up another bed and making a red trailer to match Big Red. I found this yesterday afternoon on eBay, decided to grab it, contacted the guy about an hour ago, and he laughed and said it went 45 minutes after he listed it. The price was right!

View attachment 102852

I think the first GEN beds match the ‘96 F250 better, so I’ll keep searching. But even down here, it’s hard to find them that clean and that cheap and with the tailgate.

Atleast they're replying to you. I'm trying to get a donor explorer for a future V8 swap.

Found one down here in Macon, $1000 as is at time of listing and inquiry. I asked if it was 2wd or AWD and the lady doesn't know. I asked for more information/pictures so I could figure it out, or if I could come by and take a look. She hasn't responded since. Few days after ghosting me she bumped it to $2000 and added that it has a radiator leak and she lost the title, but new tires, brakes, and fresh oil change. Now saying 1700 and not a dollar less, but still no reply to someone that expressed interest.

Even if she did reply, I'm not sure if I want to pay $1700 for one without a title and something that is primarily being bought for parts. I mean it is clean from the outside and I wouldn't mind possibly driving it for a bit as is if I put regular wheels back on it. I almost hate admitting that I actually like the way it looks as is, but I don't think I want to actually drive it on those wheels. It's been a couple weeks since she ghosted me, so maybe I'll try again this week.

The other was up your way. Listed as being in Jonesboro. 2000 Mountaineer for $1000 and the ad actually states that it is V8 awd. Perfect combo for what I need. Few issues listed, mostly doors stuck, but the seller wouldn't even acknowledge that I was trying to contact him. Offered to pay asking price in cash and be there any day of his choosing. No response. He finally updated the listing as sold today, but he could have atleast responded saying that he already had a potential buyer or something.

 

[scotts90ranger]

Changed the oil in the '97 ranger tonight, while it was in the shop I worked on the hood latch alignment more since it hasn't been right since the wreck over a year ago... got it better but it looks like the core support is shifted to the passenger side some which explains a lot on the hood latch position...

 

[Blmpkn]

Got the EGR tube hooked back up and changed the oil in the '96 yesterday, then took it for a ride to see If my valve cover gasket replacement worked.... it did!

Pretty sure it needs 5qts? I had 4 on hand.. so that's all it got lol. 4qts was more than what drained out of it though so at least there's that I'll grab another whenever I go by napa.

 

[JoshT]

If I need to repost this in another area please let me know.

Not going to say that you need to, but there is a transmission section. Might get more attention and better responses if you post there. Sorry, but I don;t know enough about the internals of the transmissions to help you there.

 

[lil_Blue_Ford]

Not going to say that you need to, but there is a transmission section. Might get more attention and better responses if you post there. Sorry, but I don;t know enough about the internals of the transmissions to help you there.

I moved it, lol

Need help with my 94 manual transmission

Hi all, I am sorry to post this here, but I dropped the transmission/case to replace the concentric slave cylinder and check things out. 4th gear was a bit noisy and a little “challenging,” noisy to engage, after getting it back from a “moving experience.” Preliminary examination shows at oil...

www.therangerstation.com

 

[IronTom]

Hello all,

Replaced the cruise control push-buttons on the steering wheel (2003 FX4)

Tom

 

[sgtsandman]

Replaced the front, right bearing assembly on the 2011. The job itself went ok. The virus someone gave me made an otherwise fine job miserable.

Now, it just needs emissions testing and a safety inspection. I also noticed that it's getting about tine for a front brake job. The pads are about half worn but the back of the right rotor is getting iffy. If one side is like that, the other is probably the same.

 

[Rick W]

Atleast they're replying to you. I'm trying to get a donor explorer for a future V8 swap.

Found one down here in Macon, $1000 as is at time of listing and inquiry. I asked if it was 2wd or AWD and the lady doesn't know. I asked for more information/pictures so I could figure it out, or if I could come by and take a look. She hasn't responded since. Few days after ghosting me she bumped it to $2000 and added that it has a radiator leak and she lost the title, but new tires, brakes, and fresh oil change. Now saying 1700 and not a dollar less, but still no reply to someone that expressed interest.

Even if she did reply, I'm not sure if I want to pay $1700 for one without a title and something that is primarily being bought for parts. I mean it is clean from the outside and I wouldn't mind possibly driving it for a bit as is if I put regular wheels back on it. I almost hate admitting that I actually like the way it looks as is, but I don't think I want to actually drive it on those wheels. It's been a couple weeks since she ghosted me, so maybe I'll try again this week.

View attachment 102892

The other was up your way. Listed as being in Jonesboro. 2000 Mountaineer for $1000 and the ad actually states that it is V8 awd. Perfect combo for what I need. Few issues listed, mostly doors stuck, but the seller wouldn't even acknowledge that I was trying to contact him. Offered to pay asking price in cash and be there any day of his choosing. No response. He finally updated the listing as sold today, but he could have atleast responded saying that he already had a potential buyer or something.

Amen. I still love Craigslist - most folks respond pretty quickly- but more and more people aren’t using it and they’re using marketplace. I don’t like marketplace because of the owners politics, but I’m still using it more and more. I have the same experience, that three out of four don’t respond at all, and the ones who do usually take a while. I’m not sure it’s marketplace, I think it’s just the way people have been raised and their manners today. Central focused.

 

[Rick W]

I moved it, lol

Need help with my 94 manual transmission

Hi all, I am sorry to post this here, but I dropped the transmission/case to replace the concentric slave cylinder and check things out. 4th gear was a bit noisy and a little “challenging,” noisy to engage, after getting it back from a “moving experience.” Preliminary examination shows at oil...

www.therangerstation.com

if you got it moving, do you still need the Transmission help?

Yuck, yuck yuck, I can’t resist

 

[JoshT]

This morning I swapped out the plug wire with one from old engineand again no change. Finally got my hands on a new spark plug this afternoon and tried a different plug wire again. Fired up and ran smooth. Going to drive it around for a bit and ig all stays good it's going to get new plugs and wires all round.

Welp, it's been a week worth of driving since and no more missfiring. Coolant is mostly water, so I I'm going to do a flush before replacing with Antifreeze. Dumped in some cleaner this morning, will have about 4 hours of running on it by the time I get home tomorrow. Might get off work early thrusday, so I'll drain, fill, and do the rest of a tune up if I have time.

The Ranger is going to be competing for wrench time for a bit with the F-100. Need to finish up a power window convesion on it, and get it driving before heading to Christmas at grandmas. Got the window kit installed and working, but need to change the wiring. I want them wired to battery hot so I can roll the windows up after turning off the truck, but the switches have LED backlights and would slowly drain the battery if left that way. Acquired a time delay relay that will let me keep them hot for up to three minutes after key off, just need to wire it in. Once that is done, I have some replacement body panels that I need to get prepped to install. Replacement inner fenders, hood and bed. The front end parts have been in storage at dad's shop for a few years, but he's getting ready to do some work on it and they are in the way of that. Be easier/better to prep and install than to move to other storage.

Hello all,

Replaced the cruise control push-buttons on the steering wheel (2003 FX4)

Tom

I need to do that too. Wish someone made replacement switches that would actually last. Every pair I've installed have had the coating turn loose from the heat. Atleast I think it's the heat, I don't apply any chemicals to them.

Amen. I still love Craigslist - most folks respond pretty quickly- but more and more people aren’t using it and they’re using marketplace. I don’t like marketplace because of the owners politics, but I’m still using it more and more. I have the same experience, that three out of four don’t respond at all, and the ones who do usually take a while. I’m not sure it’s marketplace, I think it’s just the way people have been raised and their manners today. Central focused.

Yeah I liked Craigslist better, but like you said, not many around here use it any more. FBMP works well, except the search and location functions are terrible. Doesn't matter what I set the search radius as it's going to show me items from all over the country and miss some that are local. Like you said, the problem with FBMP is the people not caring or being motivated to sell. That's probably also half the problem with the search, people not listing things properly.

I get that sellers don't want the generic "is this still available" message, but if someone takes the time to write something out, take the time to reply. Also don't demand text or call only when FBMP won't allow you to post a phone number in the listing. I tend to think if people won't deal through FBMP there is something fishy, you were willing to useit to advertise why not communicate.

Still trying to decide if I'm going to give the Mountaineer I posted previously another shot. Asking 1700 "lowest", and I'm thinking since it's been up a few seeks maybe I could offer 1500 cash. If I do I'm not sure if I want to try to buy as is, or if I want to try to knock several hundred off buy offering to buy without wheels. I have enough spare wheels and tires around to get it rolling so if they'd take1K or less without wheel I'd probably do it. Or buy for around asking price and try to sell the wheels for $5-$700.

 

[Terrys87]

I installed a 90-91 door panel on my 88. Interior is getting refreshed this month.

This is just temporary as I plan on buying another set of door panels off of a 91 truck. These panels do require some work to make fit

The newer doors require a little bracket to support the inside door handle. I used some Anti Seize to locate where I needed to mark where to mount the support.

Antisieze on screw holes

The 3rd hole needs drilled a slight bit larger to let this pin go in.

A Step bit and first size hole worked great.

 

[Roert42]

I’ve only ever tried to use Facebook once. To buy a truck topper. The first guy I had my wife message said he couldn’t meet me for a couple weeks because he was busy. Then when she messaged a second person she guy banned for some reason?

Every time I’ve used Craigslist the person either responded right away I’d the whole thing went real smooth or they never responded. I just assume if they don’t get back to me within 24hours they already sold the thing and couldn’t figure out how to delete the ad.

 

[IronTom]

Replaced broken tension pulley on the 4.0 SOHV

 

[Snoranger]

Replaced broken tension pulley on the 4.0 SOHV

View attachment 103160

Those aren’t the same… the locating pin isn’t clocked right (unless your original is completely wiped out.)