What did you do to your 2019 and up Ranger today?

[CMOS]

So on my recent trip through the Georgia Traverse I used my tailgate as a cooking station under one of those pop up canopies. I found that the impressions on the inside of the tailgate made it hars to level my stove and such for cooking. So I Googled those tailgate tables and found that they see around 300 dollars so I found some 1/2" nylon cutting board material at work and made my own. It's just screwed in place but I plan on adding some nut zerts and get some bolts with knobs so I can remove and clean easier. View attachment 92233

Where did yo get the raw material? Looks nice, and durable.

CMOS

 

[Robertmangrum.rm]

Where did yo get the raw material? Looks nice, and durable.

CMOS

Local company called World Of Plastics. We use it for our inverter bays. It's very heavy though. I may have to bite the bullet and buy one of those tailgate dampeners.

 

[Robertmangrum.rm]

OK so I've been up in the air in the rough country shackle kit on my winch tray. So today I had some time so I modified my factory tow hooks and installed them in the winch tray. I have to say I like it better. Also found some tow hooks from my bosses old super duty and drilled and bolted them to the rear bumper supports.

 

[Jim Oaks]

​

Installed the Skyjacker 3.5-Inch Lift kit and new Thunderer tires and Pro Comp wheels.

​

2021 Ford Ranger FX4 TRS-3 Project Build

You probably know this, but plug in Forscan and adjust the tire size. You input the tire circumference in centimeters. My experience took a little trial and error. I looked up the tire circumference for my 265/70-17's on Cooper's website and converted it to cm. Drove up and down the road at...

www.therangerstation.com

 

[85_Ranger4x4]

​

Installed the Skyjacker 3.5-Inch Lift kit and new Thunderer tires and Pro Comp wheels.

​

2021 Ford Ranger FX4 TRS-3 Project Build

You probably know this, but plug in Forscan and adjust the tire size. You input the tire circumference in centimeters. My experience took a little trial and error. I looked up the tire circumference for my 265/70-17's on Cooper's website and converted it to cm. Drove up and down the road at...

www.therangerstation.com

I like the wheels don't get me wrong, something about that angle reminds me of the four spoke "white sport wheels" on early first gen Rangers though...

 

[Jim Oaks]

​

Changed my splash screen to the Ford Performance splash screen.

See more at:

2021 Ford Ranger FX4 TRS-3 Project Build

Changing Tire Size With FORScan: In order for the speedometer to read correctly you need to change the tire size programmed into the Ranger. First go Forscan and download Forscan for your computer: Download FORScan Then sign up for a 2-month free extended license key: Support Request...

www.therangerstation.com

 

[Blmpkn]

Bought a herculiner kit yesterday, to pretty the bed up for trade-in. Two and a half years of using the truck like a truck has the inside of the bed in terrible shape lol. 90$ and some time will pay off bigtime here for sure. Its not gonna fix the dents.... but the fact that 30% of the factory paint is now missing will be sufficiently hidden lol. That's the plan for after work.

Also did a little hammering and put some grip tape down on the front door sills.. I accidentally shut my snow brush in the drivers door over the winter.. denting the sill plate and causing some paint to chip off. Can't tell with the grip tape there

 

[Roert42]

Bought a herculiner kit yesterday, to pretty the bed up for trade-in. Two and a half years of using the truck like a truck has the inside of the bed in terrible shape lol. 90$ and some time will pay off bigtime here for sure. Its not gonna fix the dents.... but the fact that 30% of the factory paint is now missing will be sufficiently hidden lol. That's the plan for after work.

Also did a little hammering and put some grip tape down on the front door sills.. I accidentally shut my snow brush in the drivers door over the winter.. denting the sill plate and causing some paint to chip off. Can't tell with the grip tape there

No one buy any used cars from this guy. They are 90% spray foam and body filler.

 

[Blmpkn]

No one buy any used cars from this guy. They are 90% spray foam and body filler.

They run like a top though! Gotta make up for that ADM somehow lol. Fingers crossed... going to look at a 2023 big bend on Saturday morning. About 3k ADM on that one but whatever.

 

[Uncle Gump]

​

Installed the Skyjacker 3.5-Inch Lift kit and new Thunderer tires and Pro Comp wheels.

​

2021 Ford Ranger FX4 TRS-3 Project Build

You probably know this, but plug in Forscan and adjust the tire size. You input the tire circumference in centimeters. My experience took a little trial and error. I looked up the tire circumference for my 265/70-17's on Cooper's website and converted it to cm. Drove up and down the road at...

www.therangerstation.com

That Skyjacker lift gave your truck an entirely different attitude. Wheels were a good choice too.

 

[Blmpkn]

Lipstick.. applied

Almost makes me wish I had it lined sooner....

 

[sgtsandman]

View attachment 92629
View attachment 92630View attachment 92631


Lipstick.. applied

Almost makes me wish I had it lined sooner....

So that is what the Non-LED tail light look like.

 

[Blmpkn]

So that is what the Non-LED tail light look like.

Yeah.. kinda dumb looking lol.

 

[Jim Oaks]

How do you like it? I need a liner.

 

[Robertmangrum.rm]

How do you like it? I need a liner.

We use the Raptor liner at work all the time. We used to use the Herculiner brand but it seemed to not last quite as long on the generator bays. But over all did real well on metal or aluminum surfaces just not as good on the wood in the bay floors