Well this aint good...

[RobbieD]

Hey! I'm only 60.

And I'll have you know, that while leading a group of Rangers (3 if which were 2019 or newer) at highway speeds I was repeatedly asked to slow down. Sometimes to let the guy with the V8 catch up to us.

Sounds like Gramps found the keys, and snuck out in the car again.

 

[scotts90ranger]

I havent either but the only reason i asked was i know on rusty #1 (non ac) the fan shroud said "cooling system not equipped for AC"....maybe reffering to the fan clutch or something? No idea. But it dont hurt to ask.

Both trucks are manual and identical besides that

That is most likely the fan shroud, the ones that say not equipped for A/C are usually just a piece on top to keep your fingers out of the fan where with A/C it will have a full fan shroud to help with the added restriction of having a condenser in front of the radiator.

 

[rusty ol ranger]

That is most likely the fan shroud, the ones that say not equipped for A/C are usually just a piece on top to keep your fingers out of the fan where with A/C it will have a full fan shroud to help with the added restriction of having a condenser in front of the radiator.

Ah ok.

 

[Snoranger]

Hey! I'm only 60.

And I'll have you know, that while leading a group of Rangers (3 if which were 2019 or newer) at highway speeds I was repeatedly asked to slow down. Sometimes to let the guy with the V8 catch up to us.

Guys, I know we said we wouldn’t tell him the truth… but he’s getting pretty cocky. If he keeps this up, we may have to tell him.
@Jim Oaks
@85_Ranger4x4
@Robertmangrum.rm

 

[Brain75]

on the 3rd gen there is an additional piece of plastic at the bottom in addition to a different shroud.... I've seen it in a video, don't know if it's there on 2nd gen or something similar.

 

[Curious Hound]

Guys, I know we said we wouldn’t tell him the truth… but he’s getting pretty cocky. If he keeps this up, we may have to tell him.
@Jim Oaks
@85_Ranger4x4
@Robertmangrum.rm

I'll defend the 3.slow until the day I die.

 

[85_Ranger4x4]

Guys, I know we said we wouldn’t tell him the truth… but he’s getting pretty cocky. If he keeps this up, we may have to tell him.
@Jim Oaks
@85_Ranger4x4
@Robertmangrum.rm

It's kinda cute, let him have his moment.

 

[Curious Hound]

It's kinda cute, let him have his moment.

Have you got your wiring dried out yet?

 

[Curious Hound]

Guys, I know we said we wouldn’t tell him the truth… but he’s getting pretty cocky. If he keeps this up, we may have to tell him.
@Jim Oaks
@85_Ranger4x4
@Robertmangrum.rm

Oh, really. Comments from the guy who scrapes his skid plates every time he drives over a sheet of paper?

 

[85_Ranger4x4]

Have you got your wiring dried out yet?

No idea, it hasn't ran in over a month.

 

[sgtsandman]

Oh, really. Comments from the guy who scrapes his skid plates every time he drives over a sheet of paper?

 

[Snoranger]

Oh, really. Comments from the guy who scrapes his skid plates every time he drives over a sheet of paper?

That wasn’t a sheet of paper… it was parts that fell off your truck.

View attachment 121290

Those weren’t shots you heard… that was Eric’s truck backfiring.

 

[rusty ol ranger]

That wasn’t a sheet of paper… it was parts that fell off your truck.

I usually drive over my OWN parts

 

[Blmpkn]

I usually drive over my OWN parts

& Here I was thinking that just sitting on them by accident was bad.. glad I don't have YOUR problem ha

 

[rusty ol ranger]

& Here I was thinking that just sitting on them by accident was bad.. glad I don't have YOUR problem ha

There is actually a story behind that....

luckly for me the part was a driveshaft. Unlucky for the tire it had some sharp edges