want to run 33's

[moonliteshawn]

what is the bare minimum lift i need to run 33's on my o7 fx4 without issues i dont really want a body lift

 

[legoms013]

If you want 33x10.5's do a torsion twist and some beltechs.

If you want 33x12.5's I believe you need a body lift and or a torsion twist/beltechs.

Don't hold me to it so do a search as this has been covered many times before and there should be plenty of posts about it.

 

[moonliteshawn]

would a leveling kit be better than the twist and what belltech shackels do i need and what shock will give me the best ride i use it for work with lots of really rough muddy roads

 

[Sunk]

You need Belltech 6400 shackles, or knock off part store brand shackles will work. They're made for lowering full size Chevys but their shackles are mounted inverted.

 

[RavoHimself]

If you want 33x10.5's do a torsion twist and some beltechs.

If you want 33x12.5's I believe you need a body lift and or a torsion twist/beltechs.

Don't hold me to it so do a search as this has been covered many times before and there should be plenty of posts about it.

this^

i believe 12.5's have been done with just the torsion twist. but if you want you could just throw a 1" BL on with the twist to be sure. and you wont have a huge frame/body gap

 

[Downey]

^^^^ yea different wheels and a 1bl and crank tbars and shackles you should fit 33s with out rubbing

 

[moonliteshawn]

what offset wheels do i need to run the 10.5s and what shocks will give me the best ride

 

[RangerBoy94]

Bilstien shocks are the best shock around. You should probably get 15X8 or 15X7 rims with 3.75-3.5 backspacing.

 

[moonliteshawn]

how will the truck ride with the t bars cranked and do you know what part numbers i need for the shocks or do i just need shocks that are 2 inches longer ?

 

[moonliteshawn]

and where do i get the 1 bl at

 

[schaffer]

I have 33x12.5s on my ranger with just the body lift,minimal rubbing at full lock when fully flexed.

 

[cstishenko]

3 inch body lift or keep it stock.