Upper coil retainers

[shadow88]

What are people using for upper coil retainer after using these rough country coils?

 

[4x4junkie]

Superlift sells them... Or hell just make 'em yourself with some 3/16" strip steel.


.

 

[vwa1]

I used the stock ones.

 

[4x4junkie]

What stock ones?


You mean F-150 ones?

 

[vwa1]

You know what? I was thinking of an F150! Just took a look at my B2 and it doesn't have them at all. I replaced both shock/spring towers an a customers F150 around the same time I installed the lift on my B2. Must have got them mixed up.

 

[shadow88]

4x4 junkie, what's that little black shock looking thing in your pic of the coil retainers? It looks stock

 

[Sasquatch_Ryda]

4L engine damper

Sent from my SGH-I747M using Tapatalk

 

[shadow88]

Thanks

 

[Jim Oaks]

I use a hose clamp. I've never had one break on me flexing the suspension. It may look loose in the photo, but that is just the excess material wrapping back around. It's a cheap, simple, and effective solution.

 

[Sasquatch_Ryda]

I ran hose clamps for 9 years....never broke one either.

Sent from my SGH-I747M using Tapatalk

 

[Shran]

I also used hose clamps, had coils coming out left and right when I first lifted the truck. Never had an issue after that. It doesn't take much to keep them in place. Hose clamps are the shit for a lot of things.

 

[RICO9]

I broke my hose clamp thanksgiving weekend. They did hold up for 8 years though. I'm gonna make some like junkie's here before I go out again.

 

[shadow88]

I made these out of 3/16 steel