Turn signal lever

[84tony]

Anyone know the Ford part number for the turn signal lever circled in red. I need one for 85-88 Ranger. I think is should start with E5TZ-?????. I know 83-84 are different, because it was also horn button for those two years.

 

[84tony]

I think I found a solution, the 84-86 Mustang uses a lever that look identical to this one. I am having some verify that they are the same.

 

[Shran]

If you can't track one down, let me know, I am sure I have several spares in my parts hoard.

 

[84tony]

The 84-86 Mustang and 85-88 Ranger turn signal levers are the same. I am doing a Restomod on my Ranger and want every thing to look new. I didn't want to use the faded turn signal lever with the NOS wiper lever I found.

 

[AndyB.]

The Ford part number is E6ZZ-13305-A. NOS are hard to find and pretty expensive.

 

[84tony]

I bought the one from 5.0resto (LMR.com). I went to put it in last night and noticed that the white markings were printed on the wrong side. If I were to have put it in the markings would face the roof not the driver. I called them and told them that they were made incorrectly and they are now sending me a new one with the correct marking location. The one on the picture above is correct. I will take pictures of the one that's wrong tonight and post it later.

 

[84tony]

As you can see below the new lever has the markings on the top side. They are sending a free replacement with markings on the correct (front) side.

 

[hotoldsman]

If you can't track one down, let me know, I am sure I have several spares in my parts hoard.

Im in need 83 ranger turn signal lever,inside front windshield trim top and side rails black or blue

 

[Shran]

Im in need 83 ranger turn signal lever,inside front windshield trim top and side rails black or blue

I do not have what you need, sorry.

 

[Terrys87]

@84tony Thanks for posting. I too am going for the new as possible look.