Welcome Visitor! Please take a few seconds and jKsled
Member
- Joined
- Feb 4, 2009
- Messages
- 20
- Vehicle Year
- 1986
- Transmission
- Automatic
I realize there have been many posts on this in the past, but i am not finding exactly what i need. I am debating switching my 1986 4x4 2.9l a4ld tranny to a manual tranny, because it is currently inoperable.
I would really appreciate some information on the basic stuff. I have seen plenty of posts on specific questions relating to this, but i am very inexperienced with transmissions.
so i have some basic questions that would be awesome to know before i proceed with the project ...
1)level of difficulty. I am quite competent enough to figure anything out, but i am worried about being overwhelmed or lack of equipment
2)what should i look for with the swap? i.e. easiest swap
3)the basic process-i would like to know what i'm doing before i dive in and get stuck. like an overview of the whole process
Thanks, this will help alot with deciding whether or not to do this. If i do decide to do it, i will also be needing to know the complete process lol. every tip is appreciated!!!
I would really appreciate some information on the basic stuff. I have seen plenty of posts on specific questions relating to this, but i am very inexperienced with transmissions.
so i have some basic questions that would be awesome to know before i proceed with the project ...
1)level of difficulty. I am quite competent enough to figure anything out, but i am worried about being overwhelmed or lack of equipment 2)what should i look for with the swap? i.e. easiest swap3)the basic process-i would like to know what i'm doing before i dive in and get stuck. like an overview of the whole processThanks, this will help alot with deciding whether or not to do this. If i do decide to do it, i will also be needing to know the complete process lol. every tip is appreciated!!!
