JayDog
New Member
- Joined
- Feb 18, 2015
- Messages
- 3
- City
- Pennsylvania
- Vehicle Year
- 1994
- Transmission
- Manual
- My credo
- Haul like a dump truck and push like a dozer
OK everyone my dilemma is this,I replaced the
clutch with a heavier duty clutch and also flywheel , pilot bearing,didn't change the throwout bearing or slave cyl.I had a chatter either in the transmission or clutch prior to the new installation ,when I replaced the clutch ,flywheel and so on.I would say 3 weeks ago the chatter is still there except when I press down the pedal,when the pedal is released the chatter resumes,could anyone tell me what this may be or put me in the direction to go.its a 94 ranger 2.3 mild lift with 33's 5 speed,thank u for all who may help
clutch with a heavier duty clutch and also flywheel , pilot bearing,didn't change the throwout bearing or slave cyl.I had a chatter either in the transmission or clutch prior to the new installation ,when I replaced the clutch ,flywheel and so on.I would say 3 weeks ago the chatter is still there except when I press down the pedal,when the pedal is released the chatter resumes,could anyone tell me what this may be or put me in the direction to go.its a 94 ranger 2.3 mild lift with 33's 5 speed,thank u for all who may help
Last edited: