Transfer case

[Rangerman87]

When I dropped the tranny/tcase to change out the clutch and slave cyl I decided to rebuild the shift motor.Now it's all back together and now the 4wd lights won't go off and it(4wd) won't engage.Basically the 4wd indicator stays lit and the 4 lo blinks.Maybe I didn't line up the marks just right,would that cause it?I want to avoid buying another motor.

 

[Rowdy Fitzgerald]

I would guess it isn't lined back up to the original location but I've never pulled a electric shift apart only manual shifts. Pull the motor back off and see if you can line it up differently is what comes to my mind

 

[BravoEcoNovember]

Agree. There are not many chances to build the shift motor in the wrong position, as far as all parts have matching keys. But take a look if nothing got inverted, and check position and continuity on the contact disc. If there`s not the expected electric contact, the motor will hunt for the commanded position, blink lights and go back to the previous position.

 

[James86]

Same thing happened to a friend on his 98 when he pulled and regreased his shift motor. He just pulled the battery for a while and it solved it.