booblinker
Well-Known Member
I have a1993 ranger 3.0 4x4, what shhifter assemlies will fit it?
-
Welcome Visitor! Please take a few seconds and Register
for our forum. Even if you don't want to post, you can still 'Like' and react to posts.
trans interchansbilty question
- Thread starter booblinker
- Start date
booblinker
Well-Known Member
As in the top of the trans with the shift forks and that whole assembly on the top of the trans.
- Joined
- Sep 4, 2007
- Messages
- 3,814
- Age
- 38
- Vehicle Year
- 1997, 1994
- Transmission
- Manual
All M5OD-R1 top sections will fit. You can get one from any 90+ RBV with a manual tranny.
- Joined
- Jun 1, 2001
- Messages
- 7,897
- Age
- 63
- Vehicle Year
- 1987... sorta
- Transmission
- Manual
The 1994-on top covers have a slightly taller shift tower with a somewhat
longer "finger" (stub lever) and thus while the top cover as an ASSEMBLY will fit, you cannot change the stub lever from one to the other.
the "main" shift lever is the same from 88-97.
In 1998 the stub lever is keyed differently to work with a revised main shift lever that mounts differently (and places the shift knob more than an inch further to the rear)
AD
longer "finger" (stub lever) and thus while the top cover as an ASSEMBLY will fit, you cannot change the stub lever from one to the other.
the "main" shift lever is the same from 88-97.
In 1998 the stub lever is keyed differently to work with a revised main shift lever that mounts differently (and places the shift knob more than an inch further to the rear)
AD
Sponsored Ad
Sponsored Ad
TRS Events
Member & Vendor Upgrades
For a small yearly donation, you can support this forum and receive a 'Supporting Member' banner, or become a 'Supporting Vendor' and promote your products here. Click the banner to find out how.
Recently Featured
Ranger Adventure Video
TRS Merchandise
Follow TRS On Instagram
