trans interchansbilty question

[booblinker]

I have a1993 ranger 3.0 4x4, what shhifter assemlies will fit it?

 

[booblinker]

As in the top of the trans with the shift forks and that whole assembly on the top of the trans.

 

[metalmacguyver]

All M5OD-R1 top sections will fit. You can get one from any 90+ RBV with a manual tranny.

 

[AllanD]

The 1994-on top covers have a slightly taller shift tower with a somewhat
longer "finger" (stub lever) and thus while the top cover as an ASSEMBLY will fit, you cannot change the stub lever from one to the other.

the "main" shift lever is the same from 88-97.

In 1998 the stub lever is keyed differently to work with a revised main shift lever that mounts differently (and places the shift knob more than an inch further to the rear)


AD