Welcome Visitor! Please take a few seconds and WhiteFeather
New Member
- Joined
- Mar 4, 2012
- Messages
- 4
- Vehicle Year
- '96
- Transmission
- Automatic
Just finished swapping a 4R44E tranny from my '96 Explorer 4.0L 2wd for another rebuilt by Ford of same year and type. Drives great when tested, BUT... have a blinking OD light and a code P0708. I think they are connected and came up almost immediately after the swap was completed. I'm on an almost non-existent budget and need to get this completed so I can get my emissions test and tag renewed in a couple of days.
Any ideas as what could be the problem? Or where to start tracking down what I may have done? I've searched and covered this site pretty thoroughly before posting and checked that I don't have a blown fuse,
Thank you for this site and any help you can offer!
Any ideas as what could be the problem? Or where to start tracking down what I may have done? I've searched and covered this site pretty thoroughly before posting and checked that I don't have a blown fuse,
Thank you for this site and any help you can offer!
