Took a ride last sunday(lots o pics!)

[STRUCK]

Me and a buddy took a little ride last sunday, enjoy!!



Hill was slick, this was as far as i got!

 

[7.5L_STX]

i thought you said lots of pics? that wasnt much, but nice lookin rig man!

 

[STRUCK]

More...









Next area we went too..



Cool pic

 

[STRUCK]

i thought you said lots of pics? that wasnt much, but nice lookin rig man!

Still posting more lol!

 

[Flash Gordan]

Still posting more lol!

Keep going. You know how we like to see pics.

 

[STRUCK]

...More...



This one was steep!




Ok story for this one, we were leaving and I saw a wash out I didnt see when we were playing around. Tried it and found out I need limiting straps up front, yes that is my passenger side coil.

And back where it belongs!

Heres the big problem of the day. we got on the road and my truck pulled me right to the side of the road. Inner wheel bearing seized to the spindle


My wife loves watching sunsets, but didnt like this one so much lol! Ended up waiting for a friend with a trailer got home at about 9pm. Long event full day but we had fun!

 

[Flash Gordan]

Heres the big problem of the day. we got on the road and my truck pulled me right to the side of the road. Inner wheel bearing seized to the spindle

Ouch.

 

[STRUCK]

Ouch.

yea it sucked, been without my truck since then. bumming rides to work sucks had to order new parts, that'll be here tomorrow should have her back on the road then.

 

[Flash Gordan]

I hope you don't have to go through what I did a month ago. I work on school buses for a living and we had a wheel bearing seize on a spindle. No freaking amount of bashing and grinding would get the rest of that damn bearing off. We eventually had to replace the whole spindle. If it comes down to it all you should have to replace besides the bearings is the outer axle shaft. Good luck with that and keep us updated.

 

[RumpRangerSTX]

join the club my pos is down to i think i blew a head gasket not sure have not had time to check it working alot

 

[STRUCK]

I hope you don't have to go through what I did a month ago. I work on school buses for a living and we had a wheel bearing seize on a spindle. No freaking amount of bashing and grinding would get the rest of that damn bearing off. We eventually had to replace the whole spindle. If it comes down to it all you should have to replace besides the bearings is the outer axle shaft. Good luck with that and keep us updated.

Yea going through that right now, had to order a new spindle, hub and rotor assem. and the bearings. It'll all be in tomorrow.

join the club my pos is down to i think i blew a head gasket not sure have not had time to check it working alot

That sux I here ya on working alot, got tomorrow though so I can fix the truck. Let me know if you need a hand when you check it out.

 

[Flash Gordan]

join the club my pos is down to i think i blew a head gasket not sure have not had time to check it working alot

Is that why it seemed you were running on five cylinders last Friday? That really sucks.

 

[97fordrunner]

My '97 had that happen but it didn't take out the hub & Rotor just had to pound out the race and all was well, Nice looking ride though.

 

[kennykenny]

Nice, looks like the 539 pit and the powerlines?

 

[STRUCK]

Nice, looks like the 539 pit and the powerlines?

Yup, alot to do out there.