- Joined
- Nov 4, 2009
- Messages
- 1,713
- Points
- 3,101
- City
- marquette, MI
- Vehicle Year
- 2000
- Transmission
- Automatic
ive done both bias and radial, no issue's with either. ri'm workin on my 37's right now that are bias. take's me between 1 to 1.5 hour's per tire depending on the pattern. the one's pictured took me bout an hour and a quarter due to the amount of turning involved and amount of rubber removed. the 37's are takin bout an hour cuz i'm just removing to regain a little tread depth and doin a little tuning while i'm at it.
However might need to check you local law's as it might be illegal to run a cut tire on the road. however even if it is legal and you happen to blow a tire causing an accident legal or not could be in a whole world of hurt physically, financially, and depending on severity, mentally.
However might need to check you local law's as it might be illegal to run a cut tire on the road. however even if it is legal and you happen to blow a tire causing an accident legal or not could be in a whole world of hurt physically, financially, and depending on severity, mentally.