The Juice Box Revival (Blake.'s BII Build)

[Blake.]

so i found out today that the door locks take a different key than the ignition. i dont have a key for the door locks. and i was not having any luck with the coat hanger so i got creative.

there is a hole in my floor just in front of my seat mounts on the driver side. so i got a crowbar, stuck it in the hole, got a buddy to direct me and used it to roll down my window.

today i broke into my Bronco with a crowbar through the floor.

 

[4.0B2]

hahahahahahaha

my suggestion, get locks that you have a key for!

 

[4.0B2]

http://www.autozone.com/autozone/pa...?filterByKeyWord=door+locks&fromString=search

cheap... but doesn't have the liftgate lock? hmmm...???

 

[Blake.]

honestly i'll probably just disconnect the lock rod and never lock the doors again. not planning on keeping anything valuable in it anyways. especially since i'll be running my "half" doors and "half" hatch 9 months out of the year. haha

 

[Blake.]

so i've settle on some BFG M/T's.
now i REALLY want to run 35's and at only 5 bucks more per tire than the 33's i cant think of a reason to not get em. plus im not scared of some trimming. so thats not a problem.

i looked through the post your lift/tire size thread and seen guys running 33's and 34's with 3 inches of lift and with no or very little trimming. I'd like to run the smallest lift possible with these. so i believe a 3-4 inch will do the job.

best price i've found so far...

http://www.tirerack.com/tires/tires...KM2RWLV2&vehicleSearch=false&fromCompare1=yes

 

[Blake.]

been busy trying to get school goin again. its been a ****ing nightmare. they tell me i might be able to be done in december but we'll see how that goes. ready to get back to working on this this thing.

 

[Blake.]

so still no updates. trying to get tires for my DD but sat down and straightened out the plans for the bronco. here's what i came up with and it'll pretty much be done more or less in the this order.


Fix the floor
Wire the fan correctly
replace the leaky valve cover gasket
service the brakes- check pads, rotors, shoes, drums, and i know i have one leaky wheel cylinder that needs to be replaced.
4-6" lift
shocks
swap the CB out of my dakota and mount the 102" steel whip with a tie down
Mount the 6" KC's i have
craggier soft 8's 15x8
35 inch M/T's
4.88 gears
manual hubs
replace the interior plastic panels with sheet metal
half doors
half hatch
bed liner floor
Paint- desert tan and black 2 tone carried to the interior
Seats- not sure how i want the seats. stuck between water proof "racing" buckets, or leather explorer seats. and what about the back seat? still playing with ideas on this one.
bumpers- front and rear with 2" receiver hitches.
sliders
storage- big "ammo cans" in the rear and one to fit between the front buckets as a center console. roof rack maybe?

at this point i'd call it "done" but some more ideas that i think would be awesome but wouldnt necessarily bother me if i didnt get to it.

roll cage
5.0 swap
Full sized axles geared low but not so ridiculous i cant do 65 at a decent rpm.
doubler
sheet metal dash
chop top- removable hardtop


overall goal is when the truck is "finished" it will be able to be daily driven if my current Daily goes down.

 

[PonyUp]

Thanks for the thread/updates. I enjoyed the "wish list's", future visions, pics and progress along with your sense of humor.

Best to you and look forward to more sharing....

 

[Blake.]

thanks man! I'm planning on next week getting tires for my daily. so floor repairs soon to come. nothing extremely exciting for a little bit but ya gotta go through the boring crap to get to the fun stuff.

 

[azbronco2]

I fit 36's on mine with 2" washer and a 3"body lift cost me 70 bucks for it all including the steel and bolts for the body lift

 

[Blake.]

i dont want a body lift but pics? i wanna see that!

 

[Blake.]

havent done anything still. but i took it for a drive today. it's so bouncy. i mean it is an absolutely miserable ride. it feels like there is 1/2 inch of suspension travel.

 

[84bluebronco2]

I remember my 84 B2 having a ride something like a log truck. When I hit bumps the rear tended to float out to the left. Pretty fun stuff to drive. Looking forward to an update Blake!

 

[Blake.]

IT SUCKS. i mean i'm not expecting it to ride like a cadillac but i also dont expect it to ride like a tractor.

also. juice box is on hold still. catching my daily driver back up to speed and fixing oil leaks on my old suzuki rat bike. bronco will be my winter project.

 

[Blake.]

quick question. will f150 coils swap EASILY into the front end of my B2? i just remembered my dad has an extra pair of coils that came out of his 93 f150 4x4. just a random thought. they're kinda buried in the back of the shop so i couldnt exactly size em up to compare. just wondering if they'd be worth digging out.