T-case flange

[Zachalanche]

is there a flange available for my 1350 t-case with a 3 in bolt pattern? I currently have the 2.5 in bolt pattern.

 

[Jspafford]

is there a flange available for my 1350 t-case with a 3 in bolt pattern? I currently have the 2.5 in bolt pattern.

The late model Ranger's use a larger diameter bolt flange on both ends of the driveshaft. Not sure if it's 3" or not. Someone will know, be patient.

 

[4x4junkie]

The late model Ranger's use a larger diameter bolt flange on both ends of the driveshaft. Not sure if it's 3" or not. Someone will know, be patient.

bump.

Not being very patient...

Yes ('01up Supercab)

 

[AllanD]

yes, '01up ANY 13-54T-case.

Not only the 4x4.

But it MUST be a 13-54, the 44-05 Explorer T-case uses a differnet spline.

I have a large flange on my 13-54 T-case, so I can use an aluminum shaft.

AD

 

[Fx4wannabe01]

Not to thread-jack, but is there any real advange to running an aluminum rear shaft?